2
MAX SWAY
(EITHER DIRECTION)
DO NOT
SCALE FROM
THIS PRINT
.120 3.05
REF
(50 POSITION ONLY)
NO OF POSITIOINS X .100 [2.54]
.008 [.20] (CUT POSITIONS)
.050
-
.005
+
.001
1.27
-
0.13
+
0.03
(SEE NOTE 4)
"B"
"B"
C
L
.040 1.02
(SEE NOTE 8)
.120
REF
3.05
90°
±2°
-RA
C
CES-1XX-XX-X-S-XX
PLATING SPECIFICATION
CONTACT LEAD STYLE
-01 THRU -50
No OF POSITIONS
ROW SPECIFICATION
-S: SINGLE ROW
(USE CES-XX-S)
OPTIONS
-RA: RIGHT ANGLE
(STYLE -02 ONLY)
.200
REF
5.08
.025
REF
0.64
"A"
.100 2.54
"A"
"A"
SECTION "B"-"B"
C
L
C
L
.010
REF
0.25
.020 0.51
REF
2
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
PACKAGING VIEW
LEAD STYLE -01 & -02
NOTE: PINS TO BE
FACING THE
SAME
DIRECTION
NOTE:
MIXED PIN
ORIENTATION
ACCEPTABLE
-01: USE C-45-01-X
-02: USE C-45-02-X
+.002 [.03]
-.005 [.13]
C
PACKAGING VIEW
LEAD STYLE -02-RA
.03
.13
.001
.005
C
C
-T: MATTE TIN, CONTACT AND TAIL
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MIN CONTACT RETENTION 2 LB
3. MAX ALLOWABLE BOW: .006 [.015] IN/IN
4. "END WALLS" AFTER CUTTING SHOULD BE .015
[.38 ]
5. MAX CUT FLASH: .015 [.38] WITH NO FLASH ALLOWED IN HOLES.
6. MAX TERMINAL BURR: .003 [.08]
7. WHEN FILLING THE ASSEMBLY, ALL CONTACTS MUST BE
FACING THE SAME DIRECTION.
8. TO BE MEASURED AT THE BEND.
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
CLOSED ENTRY SOCKET STRIP
BY:
CES-1XX-XX-X-S-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KOLB 12-6-89
1
1
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\CES-1XX-XX-X-S-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
INSULATOR: PBT, UL 94 VO
COLOR: BLACK
TERMINAL: PHOS BRONZE
REVISION AE
