IS62WV5128DALL/DBLL
IS65WV5128DALL/DBLL
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774 1
Rev. A1
11/1/2016
Copyright © 2016 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without
notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the lat-
est version of this device specification before relying on any published information and before placing orders for products.
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reason-
ably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications
unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that:
a.) the risk of injury or damage has been minimized;
b.) the user assume all such risks; and
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
®
Long-term Support
World Class Quality
512K x 8 LOW VOLTAGE,
ULTRA LOW POWER CMOS STATIC RAM
FEATURES
• High-speedaccesstime:35,45,55ns
• CMOSlowpoweroperation
36mW(typical)operating
9µW(typical)CMOSstandby
• TTLcompatibleinterfacelevels
• Singlepowersupply
1.65V–2.2VV
dd (IS62WV5128dALL)
2.3V–3.6VVdd (IS62WV5128dBLL)
• Fullystaticoperation:noclockorrefresh
required
• Threestateoutputs
• IndustrialandAutomotivetemperaturesupport
• Lead-freeavailable
DESCRIPTION
The ISSI IS62WV5128DALL / IS62WV5128DBLL are
high-speed,4MbitstaticRAMsorganizedas512Kwords
by8bits.ItisfabricatedusingISSI's high-performance
CMOStechnology.Thishighly reliableprocess coupled
with innovative circuit design techniques, yields high-
performance and low power consumption devices.
When CS1 is HIGH (deselected) the device assumes
a standby mode at which the power dissipation can be
reduceddownwithCMOSinputlevels.
Easy memory expansion is provided by using Chip Enable
andOutputEnableinputs.TheactiveLOWWriteEnable
(WE) controls both writing and reading of the memory.
The IS62WV5128DALL and IS62WV5128DBLL are
packagedin the JEDEC standard 32-pinTSOP (TYPE
I),32-pinsTSOP(TYPEI),32-pinTSOP(TypeII),32-pin
SOPand36-pinminiBGA.
FUNCTIONAL BLOCK DIAGRAM
NOVEMBER 2016
A0-A18
CS1
OE
WE
512K x 8
MEMORY ARRAY
DECODER
COLUMN I/O
CONTROL
CIRCUIT
GND
VDD
I/O
DATA
CIRCUIT
I/O0-I/O7