LQW2BANR15J00L Datasheet LQW2BANR20G00L, LQW2BAN30NG00L, LQW2BANR12J00L | P4-P6

Spec No.JELF243A-0115B-01 P.4/11

MURATA MFG.CO., LTD

Reference Only

7.Mechanical Performance

No. Item Specification Test Method

7.1 Shear Test Chip coil shall not be damaged

after tested as test method.

Substrate:Glass-epoxy substrate

(in mm)

Applied Direction:

Force:10N

Hold Duration:5s±1s

7.2 Bending Test Substrate:Glass-epoxy substrate

(100mm×40mm×1.0mm)

Speed of Applying Force:1mm / s

Deflection:3mm

Hold Duration:5s

7.3 Vibration Oscillation Frequency:

10Hz~2000Hz~10Hz for 15 min

Total amplitude 3 mm or Acceleration

amplitude 196m/s

whichever is smaller.

Time : A period of 2 hours in each of

3 mutually perpendicular directions.

(Total 6hours)

7.4 Solderability The wetting area of the electrode

shall be at least 90% covered with

new solder coating.

Flux:Ethanol solution of rosin,25(wt)%

Includes activator equivalent to 0.06(wt)%

chlorine.(immersed for 5s to 10s)

Solder:Sn-3.0Ag-0.5Cu

Pre-Heating:150°C±10°C / 60s to 90s

Solder Temperature:240°C±5°C

Immersion Time:3s±1s

7.5 Resistance to

Soldering Heat

Appearance:No damage

Inductance Change: within ±5%

Flux:Ethanol solution of rosin,25(wt)%

Includes activator equivalent to 0.06(wt)%

Chlorine.(immersed for 5s to 10s)

Solder:Sn-3.0Ag-0.5Cu

Pre-Heating:150°C±10°C / 60s to 90s

Solder Temperature:270°C±5°C

Immersion Time:10s±1s

Then measured after exposure in the room

condition for 24h±2h.

0.76

2.8

1.78

Chi

Coil

Pattern

Solder resist

Substrate

Chip Coil

R230

Deflection

Product

Pressure jig

(in mm)

Spec No.JELF243A-0115B-01 P.5/11

MURATA MFG.CO., LTD

Reference Only

8.Environmental Performance

It shall be soldered on the substrate.

No. Item Specification Test Method

8.1 Heat Resistance Appearance:No damage

Inductance Change: within ±5%

Q Change: within ±20%

Temperature:125°C±2°C

Time:1000h (+48h,0h)

Then measured after exposure in the room

condition for 24h±2h.

8.2 Cold Resistance Temperature:-55°C±2°C

Time:1000h (+48h,-0h)

Then measured after exposure in the room

condition for 24±2 h.

8.3 Humidity Temperature:85°C±2°C

Humidity:85%(RH)

Time:1000h (+48h,-0h)

Then measured after exposure in the room

condition for 24h±2h.

8.4 Temperature

Cycle

1 cycle:

1 step:-55°C±2°C / 30min±3 min

2 step:Ordinary temp. / 10min to 15 min

3 step:+125°C±2°C / 30min±3 min

4 step:Ordinary temp. / 30min±3 min

Total of 10 cycles

Then measured after exposure in the room

condition for 24h±2h.

9.Specification of Packaging

9.1 Appearance and Dimensions of plastic tape (8mm-wide, 4mm-pitch)

・Dimension of the Cavity is measured at the bottom side.

9.2 Specification of Taping

(1) Packing quantity (standard quantity)

2,000 pcs. / reel

(2) Packing Method

Products shall be packed in the cavity of the plastic tape and sealed by Cover tape.

(3) Sprocket hole

The sprocket holes are to the right as the tape is pulled toward the user.

(4) Spliced point

Plastic tape and Cover tape has no spliced point.

(5) Missing components number

Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater,

and are not continuous. The Specified quantity per reel is kept.

9.3 Pull Strength

Plastic tape 5N min.

Cover tape 10N min.

2.3±0.1

1.5

1.55±0.1

4.0±0.1

2.0±0.05

4.0±0.1

+0.1

-0

1.75±0.1

3.5±0.05

8.0±0.3

1.1±0.1

引き出し方向

0.25

0.05

Direction of feed

(in mm)

1.8±0.1

1.65±0.1

Spec No.JELF243A-0115B-01 P.6/11

MURATA MFG.CO., LTD

Reference Only

165 to 180 degree

Cover tape

Plastic tape

9.4 Peeling off force of cover tape

Speed of Peeling off 300mm/min

Peeling off force

0.1N to 0.6N

(minimum value is typical)

9.5 Dimensions of Leader-tape,Trailer and Reel

There shall be leader-tape ( cover tape and empty tape) and trailer-tape (empty tape) as follows.

(in mm)

9.6 Marking for reel

Customer part number, MURATA part number, Inspection number( 1) , RoHS Marking ( 2),

Quantity etc ･･･

1) <Expression of Inspection No.> 

□□ OOOO ×××

(1) (2) (3)

(1) Factory Code

(2) Date First digit : Year / Last digit of year

Second digit : Month / Jan. to Sep. 1 to 9, Oct. to Dec. O, N, D

Third, Fourth digit : Day

(3) Serial No.

2) < Expression of RoHS Marking > ROHS – Y (△)

(1) (2)

(1)

RoHS regulation conformity parts.

(2) MURATA classification number

9.7 Marking for Outside package (corrugated paper box)

Customer name, Purchasing order number, Customer part number, MURATA part number,

RoHS Marking ( 2) ,Quantity, etc  ･･･

9.8. Specification of Outer Case

Outer Case Dimensions

(mm)

Standard Reel Quantity

in Outer Case (Reel)

W D H

186 186 93 5

∗ Above Outer Case size is typical. It depends on a quantity of an order.

10. ！ Caution

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially

high reliability for the prevention of defects which might directly cause damage to the third party's life,

body or property.

(1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.)

(2) Aerospace equipment

(7) Traffic signal equipment

(3) Undersea equipment

(8) Disaster prevention / crime prevention equipment

(4) Power plant control equipment (9) Data-processing equipment

(5) Medical equipment

(10) Applications of similar complexity and /or reliability

requirements to the applications listed in the above

Empty tape

190 min.

Leader

Trailer

2.0±0.5

13.0±0.2

21.0±0.8

180

9.0

13.0±1.4

-3

Direction of feed

210 min.

160 min.

Cover tape

-0

Label

P1-P3 P4-P6 P7-P9 P10-P11

LQW2BANR15J00L

Mfr. #:

Buy LQW2BANR15J00L

Manufacturer:

Murata Electronics

Description:

Fixed Inductors

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LQW2BANR15J00L

LQW2BANR15J00L

Products related to this Datasheet