AS1153, AS1157
Dual LVDS Receiver
www.austriamicrosystems.com/Interfaces-LVDS/AS1153 Revision 1.02 1 - 16
Datasheet
1 General Description
The AS1153, AS1157 are dual flow-through LVDS (low-voltage differ-
ential signaling) receivers which accept LVDS differential inputs and
convert them to LVCMOS outputs. The receivers are perfect for low-
power low-noise applications requiring high signaling rates and
reduced EMI emissions.
The devices are guaranteed to receive data at speeds up to
260Mbps (130MHz) over controlled impedance media of approxi-
mately 100Ω. Supported transmission media are PCB traces, back-
planes, and cables.
The AS1153, AS1157 features integrated parallel termination resis-
tors (nominally 107Ω), which eliminate the requirement for discrete
termination resistors, and reduce stub lengths. The AS1153, AS1157
uses high impedance inputs and requires an external termination
resistor when used in a point-to-point connection.
The integrated Failsafe feature sets the output high if the inputs are
open, undriven and terminated, or undriven and shorted.
All inputs conform to the ANSI TIA/EIA- 644 LVDS standards. Flow-
through pinout simplifies PC board layout and reduces crosstalk by
separating the LVDS inputs and LVCMOS outputs.
The devices are available in a 8-pin SOIC package.
Figure 1. AS1153, AS1157 - Block Diagram
2 Key Features
Flow-Through Pinout
Guaranteed 260Mbps Data Rate
300ps Pulse Skew (Max)
Conform to ANSI TIA/EIA-644 LVDS Standards
Single +3.3V Supply
Operating Temperature Range: -40°C to +85ºC
Failsafe Circuit
Integrated Termination (AS1157)
8-pin SOIC Package
3 Applications
Digital Copiers, Laser Printers, Cellular Phone Base Stations, Add/
Drop Muxes, Digital Cross-Connects, DSLAMs, Network Switches/
Routers, Backplane Interconnect, Clock Distribution Computers,
Intelligent Instruments, Controllers, Critical Microprocessors and
Microcontrollers, Power Monitoring, and Portable/Battery-Powered
Equipment.
AS1153/57
IN1-
IN1+
IN2+
IN2-
VCC
OUT1
OUT2
GND
