1437038

https://www.phoenixcontact.com/pi/products/1437038
08/20/2018Page1/4
Flush-type connector-SACC-CI-M12MS-8CON-L90 SH SCO-1437038
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type connector, plug, 8-pos., A-coded, shielded, with angled solder connection, only
contact insert
Why buy this product
Reduced mounting costs thanks to two-piece device connector
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front
plate
Additional gasket for the device when not plugged in
Key Commercial Data
Packing unit 20 STK
Minimum order quantity 20 STK
GTIN
GTIN 4046356438605
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C 2 A
Rated voltage 30 V
Rated surge voltage 0.8 kV
https://www.phoenixcontact.com/pi/products/1437038
08/20/2018Page2/4
Flush-type connector-SACC-CI-M12MS-8CON-L90 SH SCO-1437038
Technical data
General
Number of positions 8
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Solder pins
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (Installation-side)
Mounting type PCB mounting
Material
Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6
Sealing material FKM / EPDM
Cable
Conductor cross section 0.25 mm²
Conductor structure signal line 14x 0.15 mm
Core diameter including insulation 1.15 mm ±0.07 mm
Thickness, insulation 0.21 mm
Standards/specifications M12 connector IEC61076-2-101
Insulation resistance ≥ 20 MΩ*km
Conductor resistance ≤ 57.6 mΩ/m
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Flammability rating according to UL 94 V0
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
https://www.phoenixcontact.com/pi/products/1437038
08/20/2018Page3/4
Flush-type connector-SACC-CI-M12MS-8CON-L90 SH SCO-1437038
Drawings
Schematic diagram
Pin assignment M12 plug, 8-pos., A-coded, view
plug side
Drilling diagram
Ø2,05
+0,05
Ø2,8
+0,05
3
4,16
5,44
15
8xØ1
±0,05
5,8
9,8
7,7
9,8
11,9
Ø1
±0,05
2
Drilling diagram only valid in connection with the SACC-M12-SCO PLUG L90 housing (order no.
1436709)
Dimensional drawing
28,1
Ø0,8
8,5
15,9
M12 flush-type connector, plug, contact carrier, side view
Dimensional drawing
15,9
19,2
M12 flush-type connector, plug, contact carrier, front view
Dimensional drawing
Ø7
Ø1
Optionally with O-ring (green) for tight seal when plugged in.
- the axial mating force of 80 N per connector may not be exceeded
when using with assembled O-ring!
- Avoid radial forces!
Dimensional drawing
10
20
9,2
12,5
2
1,5
Locked area on the PCB
Approvals
Approvals

1437038

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
Circular Metric Connectors SACC-CI-M12MS-8CON- L90 SH SCO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet