Features
■ RoHS compliant*
■ Convex termination style
■ 2 isolated elements in an 02 package width
■ Resistance tolerance: ±5 %
■ Resistance range: 10 ohms to 1 megohm
& zero-ohm jumper
■ Sulfur-resistant design
CAY06-AS Series - Sulfur-Resistant Thick Film Chip Arrays
* RoHS Directive 2002/95/EC Jan. 27, 2003 including
annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data
sheet can and do vary in different applications and
actual device performance may vary over time.
Users should verify actual device performance in their
specifi c applications.
General Characteristics
*RoHS COMPLIANT
Characteristic CAY06-AS
Number of Elements (Isolated) 2
Power Rating @ 70 °C per Resistor 31 mW
Resistor Tolerance ±5 %
Resistance Range (E24) plus Zero-ohm Jumper 10 ohms to 1 megohm
Temperature Coeffi cient of Resistance (TCR) ±200 ppm
Maximum Overload Voltage 25 V
Maximum Working Voltage 12.5 V
Operating Temperature Range -55 to +125 °C
Storage Conditions
+5 ~ +40 °C, 25~75 % RH, 1 year
Derating Temperature +70 °C
Packaging (Paper Tape) 10,000 pcs. per reel
Zero-ohm Jumper:
Current Rating
Maximum Resistance
1 A per element
100 milliohms
Environmental Characteristics
Specifi cation
Test Method
(JIS C 5201-1) Characteristics
Short Time
Overload
Rated voltage x 2.5, 5 seconds ±(2 % +0.1 ohm)
Soldering Heat +260 °C ±5 °C, 10 ±1 seconds ±(1 % +0.05 ohm)
Temperature
Cycling
-55 °C (30 minutes) - normal (2~3 minutes)
+125 °C (30 minutes) - normal (2~3 minutes), 5 cycles
±(1 % +0.05 ohm)
Moisture Load
Life
+40 °C, 90~95 % RH, 1000 hours,
1.5 hours ON, 0.5 hours OFF
±(3 % +0.1 ohm)
Load Life
+70 °C, 1000 hours,
1.5 hours ON, 0.5 hours OFF
±(3 % +0.1 ohm)
Sulfur Test 3 ppm H2S, +50 °C, 90~95 % RH, 100 hours ±(5 % +0.1 ohm)
NOTE: Zero-ohm jumper <100 milliohms.
How To Order
CA Y 06 - 103 J 2 AS
Chip Array
Type
• Y = Convex
Model
• 06 = 02 Package Width
Resistance Code
• First two digits are signifi cant,
third digit represents number of
zeros to follow
(example: 103 = 10K ohms)
• 000 = Zero-ohm jumper
Resistance Tolerance
• J = ±5 %
Resistors
• 2 = 2 Resistors
Special Characteristics
• AS = Sulfur-resistant, Tin-plated terminations
(RoHS compliant)
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
Soldering Profi le
25
75
125
175
225
275
0 50 100 150 200 250 300
Time (seconds)
Temperature (°C)
60 - 120 seconds
60 - 90
seconds
260 °C peak
190 °C
150 °C
220 °C
Ramp Down
6 °C/second
255 °C
Maximum of 20 seconds between
+255 °C and +260 °C
Ramp Up
3 °C/second maximum
10 seconds minimum
<1>
<1>
Construction
PROTECTIVE
GLASS
OVERCOAT
HIGH PURITY
ALUMINA
SUBSTRATE
TERMINATION
THICK FILM
RESISTIVE
ELEMENT
