© 2015 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
0.87 x 0.49 in (22 x 12.5 mm)
ISO-18000-6C, EPC Class 1, Gen 2
96 bit, pre-encoded for multi-vendor
Chip (MCS) based serialization
Apparel and Retail
Jewelry
Pharmaceutical and Healthcare
Antenna dimensions (CDxMD)
0.87 x 0.49 in (22 x 12.5mm)
0.87 x 0.49 in (22 x 12.5mm)
0.945 x 0.61 (24 x 15.5mm)
Total thickness over chip
10-13 mils (254-330.2 microns)
14-17 mils (356-431.8 microns)
EU Directive 2011/65/EU
Compliant
EU Directive 2011/65/EU
Compliant
100% read tested with-of-tolerance
inlay marked
100% read tested with-of-tolerance
inlay marked
Core size with adaptor insert
3 in (76.2mm) w/ foam on core
Maximum roll outer diameter (not to
exceed)
Average # of units per roll
Care and handling: RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static
charge to a minimum.
Applications: This product should be tested by the customer/ user thoroughly under end use conditions to ensure
the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any
particular purpose or use.
Warranty: Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein
is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of
the data.
Product changes: Avery Dennison reserves the right to modify, change, supplement or discontinue
product offerings at any time without notice.
Trademark statement: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation.
For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.
Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com
International +1-770-965-0807
