25
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com
D-Subminiature
Type of Connector
282=D-Subminiature with metal face for
cable end terminations, pin
contact (Standard)
283=D-Subminiature with metal face for
cable end terminations, socket
contact (Standard)
280=D-Subminiature connector with
metal face for daisy chain
applications, pin contact
281=D-Subminiature connector with
metal face for daisy chain
applications, socket contact
Number of Contacts
(9, 15, 25 or 37)
Plating
0021=30µ in. gold (in mating
area) over 50µ in.
nickel (standard)
0000=10µ in. gold (in mating
area) over 50µ in.
nickel
0022=50µ in. gold (in mating
area) over 50µ in.
nickel Mil-DTL-24308
approved.
0003=100µ in. tin-lead
How to Order D-Subminiature Connectors with Metal Face
CWR-XXX-XX-00XX
How to Or der EMI/RFI Sh ield
CWN-XXX-XX-8901
Type of Shield
292=Shield for
cable end
terminations
290=Shield for
daisy chain
terminations
Size
(09, 15,
25, 37)
Note: For information on 100% tested, ready-to-
use cable assemblies, contact the factory
or your local value-added distributor.
Hardware Mounting Kits for Metal Faced D-Connectors
To order, specify CWN-HK-XX.
CWN-HK-07
Two 4-40 screws
and washers for
midspan splices of
two CW D-Submin-
iature connectors
with the CW EMI/RFI
shield.
FILLISTER
SCREW
C-06-12
LOCK
WASHER
G-07-06-02
HEX
NUT
C-28-01
LOCK
WASHER
G-07-06-02
MALE/FEMALE
STANDOFF
C-83-05
CWN-HK-08
Two 4-40 standoffs
with lock washers
and hex nuts for front
panel mounting of
D-Subminiature con-
nector with metal face.
CWN-HK-09
Two 4-40 screws,
lock washers and
retaining clips for
mounting other
manufacturers’ D-
Subminiatures in the
CW shield and mating
to CWN-HK-10.
RETAINING
CLIP
C-45-04
LOCK
WASHER
G-07-06-02
FILLISTER
SCREW
C-06-10
HEX
NUT
C-28-01
LOCK
WASHER
G-07-06-02
MALE/FEMALE
STANDOFF
C-83-10
CWN-HK-10
Two 4-40 standoffs
with lock washers
and nuts for rear
panel mounting of
D-Subminiature
connector with
metal face.
CWN-HK-11
Two 4-40 screws,
lock washers and
four retaining clips
for mid span splices of
other manufacturers’
D-Subminiature
connectors in the
CW shield.
FILLISTER
SCREW
C-06-12
LOCK
WASHER
G-07-06-02
RETAINING
CLIP
C-45-04
RETAINING
CLIP
C-45-04
FLAT
WASHER
G-07-05-01
LOCK
WASHER
G-07-06-02
FILLISTER
SCREW
C-06-10
CWN-HK-12
Two 4-40 screws
with four washers
for mating CW
D-Subminiature
connectors with the
CW EMI/RFI shield
to front or rear panel
mounted connector.
*Flat washer not
used when mated
with front panel
mounted connector.
