1/11April 2001
■ HIGH SPEED:
f
MAX
= 270MHz (TYP.) at V
CC
= 5V
■ LOW POWER DISSIPATION:
I
CC
= 4µA(MAX.) at T
A
=25°C
■ HIGH NOISE IMMUNITY:
V
NIH
= V
NIL
= 28 % V
CC
(MIN.)
■ 50Ω TRANSMISSION LINE DRIVING
CAPABILITY
■ SYMMETRICAL OUTPUT IMPEDANCE:
|I
OH
| = I
OL
= 24mA (MIN)
■ BALANCED PROPAGATION DELAYS:
t
PLH
≅ t
PHL
■ OPERATING VOLTAGE RANGE:
V
CC
(OPR) = 2V to 6V
■ PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 374
■ IMPROVED LATCH-UP IMMUNITY
DESCRIPTION
The 74AC374 is an advanced high-speed CMOS
OCTAL D-TYPE FLIP-FLOP with 3 STATE
OUTPUT NON INVERTING fabricated with
sub-micron silicon gate and double-layer metal
wiring C
2
MOS technology.
These 8 bit D-Type Flip-Flop are controlled by a
clock input (CK) and an output enable input (OE
).
On the positive transition of the clock, the Q
outputs will be set to the logic that were setup at
the D inputs.
While the (OE
) input is low, the 8 outputs will be in
a normal logic state (high or low logic level); while
OE
is in high level, the outputs will be in a high
impedance state.
The output control does not affect the internal
operation of flip-flops; that is, the old data can be
retained or the new data can be entered even
while the outputs are off.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
74AC374
OCTAL D-TYPE FLIP-FLOP
WITH 3 STATE OUTPUTS (NON INVERTED)
PIN CONNECTION AND IEC LOGIC SYMBOLS
ORDER CODES
PACKAGE TUBE T & R
DIP 74AC374B
SOP 74AC374M 74AC374MTR
TSSOP 74AC374TTR
TSSOPDIP SOP
Obsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s)
