07/21/00 5 Row Rt Angle 1000 Series Recep Insert Tool Page 1 of 2
Metral 5 Row 1000 & 2000 Series Right Angle Receptacle Insertion Tooling
The top tool is a modified “flat rock” press bar with side plates to support the ground shield during
insertion.
The bottom tool serves as a board support during insertion and is cleared out in the areas that the tails
come through the PCB.
Top Tool Press Bar 415754-5xx
If all of the Metral modules that are to be inserted are stacked end to end you can use a standard press
bar. If you have groups of Metral connectors and then a space other than an even increment of 12mm
then you will need a custom top tool.
Standard Top Tools
415754-502 2 (12mm) Modules
415754-503 3 (12mm) Modules
415754-504 4 (12mm) Modules
415754-505 5 (12mm) Modules
415754-506 6 (12mm) Modules
415754-507 7 (12mm) Modules
415754-508 8 (12mm) Modules
415754-509 9 (12mm) Modules
415754-510 10 (12mm) Modules
415754-511 11 (12mm) Modules
415754-512 12 (12mm) Modules
415754-513 13 (12mm) Modules
415754-514 14 (12mm) Modules
415754-515 15 (12mm) Modules
415754-516 16 (12mm) Modules
415754-517 17 (12mm) Modules
415754-518 18 (12mm) Modules
415754-519 19 (12mm) Modules
415754-520 20 (12mm) Modules
415754-521 21 (12mm) Modules
Board Supports (Bottom Tools) 162383-XXX
Some Metral users prefer to develop their own board supports or use a PCB with oversized holes.
Either of these practices is acceptable but FCI also offers bottom tools for those customers who prefer
factory tooling. The bottom tools can be cut to the length needed.
STANDARD BOTTOM TOOLS
Length
162383-001 146.8mm 5.780 inches
162383-002 194.8mm 7.669 inches
162383-003 302.8mm 11.921 inches
162383-004 457.2mm 18.000 inches
162383-005 609.6mm 24.000 inches
