OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SLR-322MC3F

P1-P3P4-P6P7-P9P10-P10
　　　　
[Data Sheet]
■Rank Reference of Brightness*
*Measurement tolerance：±10%
[SLR-322x series]
Red(V)
(Ta=25ºC, I
F
＝10mA)
E
F
G
H
J
K
L
M
N
P
Q
0.40〜0.63
0.63〜1.0
1.0〜1.6
1.6〜2.5
2.5〜4.0
4.0〜6.3
6.3〜10
10〜16
16〜25
25〜40
40〜63
Orange(D)
(Ta=25ºC, I
F
＝10mA)
E
F
G
H
J
K
L
M
N
P
Q
0.40〜0.63
0.63〜1.0
1.0〜1.6
1.6〜2.5
2.5〜4.0
4.0〜6.3
6.3〜10
10〜16
16〜25
25〜40
40〜63
Yellow(Y)
(Ta=25ºC, I
F
＝10mA)
E
F
G
H
J
K
L
M
N
P
Q
0.40〜0.63
0.63〜1.0
1.0〜1.6
1.6〜2.5
2.5〜4.0
4.0〜6.3
6.3〜10
10〜16
16〜25
25〜40
40〜63
Yellowish Green(M)色
(Ta=25ºC, I
F
＝10mA)
E
F
G
H
J
K
L
M
N
P
Q
0.40〜0.63
0.63〜1.0
1.0〜1.6
1.6〜2.5
2.5〜4.0
4.0〜6.3
6.3〜10
10〜16
16〜25
25〜40
40〜63
SLR-322YC
SLR-322MC
SLR-322MG
Iv (mcd)
Rank
Iv (mcd)
SLR-322YY
Rank
Iv (mcd)
Rank
Iv (mcd)
Rank
SLR-322VC
SLR-322VR
SLR-322DC
SLR-322DU
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
4/8
2017.9 - Rev.004
　　　　
[Data Sheet]
■Part No. Construction
[SLR-322x series]
*"-"will be taken out for emitting color Special Code will be applied for Chromaticity rank Rank sign
WB/B/E series. Emitting color WB/B/E series. (for white LED） (Brightness Rank)*
Series name Package type Emitting Color Resin Color Taping Specification
V R
U U
U2 Y
D G
Y C
Y2 RC
M T
P
E
B
*Concerning the Brightness rank.
WB
*Please refer to the rank chart above for
luminous intensity classification.
*Part name is individual for each rank.
*When shipped as sample,the part name will
be a representative part name.
General products are free of ranks.
Please contact sales if rank appointment
is needed.
Green
Green
Blue
White
Yellow
Transparent Colored
Yellow
Yellowish green
Transparent Coloreless
SLR 1-Die Circular Type LED Lamps Red
<Yellow>DiffusedColored
SLD
1-Die Oval Type High Brightness LED Lamps
Orange
<Yellowish green>DiffusedColored
SLA
1-Die Circular Type High Brightness LED Lamps
Red
<Red>DiffusedColored
SLI
1-Die Circular Type Low Current High Brightness LED Lamps
Red
<Orange>DiffusedColored
2S L R － 3 N
3F
T□□
2 Y C T
1-Element straight bulk
See Taping specifications
23
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
5/8
2017.9 - Rev.004
　　　　
[Data Sheet]
Visual light emitting diode does not contain reinforcement materials such as glass fillers.
Therefore if sudden thermal and mechanical shock are given, destruction or inferiority of luminous
intensity may occur. Please take care of the handling.
　　
Enough evaluation is requested before deciding assembly and soldering conditions.
Please consult with us if any problems in the evaluation stage.
　　If stress is given during processing, It may cause
　　non-lighting failure.
　(3) Please process before soldering.
３． ASSEMBLY ON PC BOARD
　(1) In case of soldering on PCB, If the operation is done with stress, it may cause non-lighting
　　failure during soldering or using. Please design the through-holes of PCB suitable for lead pins
　　space or lead pins space after forming to avoid the physical stress on resin.
　(2) Using spacer between LEDʼs body and PCB is recommended.
[SLR-322x series]
　　to avoid the remained stress and solder heat stress.
■ATTENTION POINTS IN HANDLING
■FIXATION METHOD
１．ATTENTION POINTS
　　In case of direct mount on PCB(SLR/SLI-343 series), please take care about clinch of LED pins
　(1) Please do not give excessive heat over storage temperature to resin.
　　In case that the product has to be heated in oven for the glue fixing of surface mount parts,
　　this LED should be mounted after the glue fixing.
　(2) Please avoid stress to resin at high temperature.
２． TERMINATION PROCESSING
　(1) In case of termination processing, please fix the
　　termination
　(2) Processing position, and process the reverse side
　　of LED body.
＜Good＞ ＜No good＞
To be fixed To be fixed
＜Good＞ ＜No good＞＜Good＞
＜2 lead pins type＞
＜3 lead pins type＞
Min.15°
Min.45°
Die bonding side
＜2 lead pin type＞
Min.15°
Min.45°
Die bonding side
Min.45
＜3 lead pin type＞
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
6/8
2017.9 - Rev.004
P1-P3P4-P6P7-P9P10-P10

SLR-322MC3F

Mfr. #:
Buy SLR-322MC3F
Manufacturer:
Description:
Standard LEDs - Through Hole GREEN GRN CLEAR LENS FLAT DISC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet