SERIES
ORDER NUMBER (TABLE 1)
MATERIAL
NICKEL ALUMINIUM BRONZE
SHOT-BLAST FINISH
MODIFICATION CODE
REFER TO CH00-0250-004 2
229M312-01-ET
DRAWN
APPROVED
CHECKED
DATE
15/10/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED
H.SMITH 15/10/2015
SHT
1
DRAWING NO:
229M3XXSERIES
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
W.RUST
15/10/2015
K.SHEPPARD 15/10/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
A
S
S
Y
U
S
E
D
O
N
:
TITLE:
HEAT SHRINK BOOT BACKSHELL
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AM END THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING REV:
A
BS9522-F0020 PATT 608
REVISIONS
LTR
REVISED
DESCRIPTION
DATE APPROVED
3
A
REVISED PER ECO-15-013980
15/10/2015
H.SMITH
17/01/13
H.SMITH
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-229M312-01).
4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION.
5. BACKSHELL MATES TO BS9522-F0020 PATT 608 CONNECTORS.
CODE 79 - HEAT SHRINK BOOT BACKSHELL
