MCR18EZHF2493

MCR18
Resistors
Rev.B 4/5
zMakeup of the part number
Packaging Specifications Code
Part No.
MC 81RE
Resistance tolerance
ZH J
Nominal resistance
EZH
Paper tape (4mm Pitch) φ
180mm (7in.) 5
,
000
MCR18
J ±5%
F ±1%
J is also used
for jumper
Reel (
φ
180) : JEITA ET-7200B
: Standard product
Part No.
Resistance tolerance
Code Packaging specifications Reel
Basic ordering unit (pcs)
J(
±
5%) F(
±
1%)
F
J
:
:
4 digits
3 digits
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Resistance
tolerance
Resistance
code
zDimensions
3.00
2.95
3.05
3.10
3.20
3.15
3.25
3.30
3.35
3.40
3.45
RESISTANCE
()
LENGTH
(mm)
JIS C 5201-1 4.4.2
SAMPLE SIZE : n=20pcs
MICROMETER
0.1 1 10 100 1k 10k 100k 1M 10M
Fig.2 Dimensions (length)
0.1 1 10 100 1k 10k 100k 1M 10M
RESISTANCE
()
WIDTH
(mm)
JIS C 5201-1 4.4.2
SAMPLE SIZE : n=20pcs
MICROMETER
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
Fig.3 Dimensions (width)
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
JIS C 5201-1 4.4.2
SAMPLE SIZE : n=20pcs
MICROMETER
0.1 1
10
100
1k
10k 100k 1M
10M
RESISTANCE
()
THICKNESS
(mm)
Fig.4 Dimensions (thickness)
zElectrical characteristics
RESISTANCE
()
DC RESISTANCE
(%)
0.1 1 10 100 1k 10k 100k 1M 10M
JIS C 5201-1 4.5
SAMPLE SIZE : n=20pcs
20°C 65%RH
8.0
6.0
4.0
2.0
0.0
2.0
4.0
6.0
8.0
Fig.5 Resistance
JIS C 5201-1 4.8
SAMPLE SIZE : n=10pcs
25°C / 55°C
25°C / 125°C
900
700
500
300
100
100
300
500
700
900
TEMPERATURE COEFFICIENT (ppm/°C)
RESISTANCE
()
0.1 1 10 100 1k 10k 100k 1M 10M
Fig.6 Variation resistance with
temperature
4.0
3.0
2.0
1.0
0.0
1.0
2.0
3.0
4.0
RESISTANCE
()
R/R
(%)
0.1 1 10 100 1k 10k 100k1M 10M
JIS C 5201-1 4.13
SAMPLE SIZE : n=10pcs
RATED VOLTAGE×2.5TIMES : 2s
MAXIMUM OVERLOAD VOLTAGE : 400V
Fig.7 Overload
MCR18
Resistors
Rev.B 5/5
2.0
1.5
1.0
0.5
0
0.5
1.0
1.5
2.0
RESISTANCE CHANGE
(%)
RESISTANCE
()
JIS C 5201-1 4.18
SAMPLE SIZE : n=10pcs
SOLDERING CONDITION : 260°C 10s
0.1 1 10 100 1k 10k 100k 1M 10M
Fig.8 Resistance to soldering heat
2.0
1.5
1.0
0.5
0.0
0.5
1.0
1.5
2.0
0.1 1 10 100 1k 10k 100k 1M 10M
RESISTANCE
()
JIS C 5201-1 4.19
SAMPLE SIZE : n=10pcs
55°C / 125°C 5cyc
R/R (%)
Fig.9 Rapid change of
temperature
Fig.10 Damp heat, steady state
4.0
3.0
2.0
1.0
0
1.0
2.0
3.0
4.0
RESISTANCE CHANGE
(%)
RESISTANCE
()
JIS C 5201-1 4.24
SAMPLE SIZE : n=10pcs
40°C 93%RH WITH NO LOAD 1,000h
0.1 1 10 100 1k 10k 100k 1M 10M
RESISTANCE ()
0.1 1 10 100 1k 10k 100k 1M 10M
JIS C 5201-1 4.25.1
SAMPLE SIZE : n=10pcs
70°C 1,000h
OVERLOAD : THE RATED VOLTAGE
4.0
3.0
2.0
1.0
0
1.0
2.0
3.0
4.0
RESISTANCE CHANGE (%)
Fig.11
Endurance (at 70°C)
4.0
3.0
2.0
1.0
1.0
2.0
3.0
4.0
RESISTANCE CHANGE
(%)
RESISTANCE
()
0.1 1 10 100 1k 10k 100k 1M 10M
JIS C 5201-1 4.25.3
SAMPLE SIZE : n=10pcs
155°C WITH NO LOAD 1,000h
0
Fig.12 Endurance
JIS C 5201-1 4.29
SAMPLE SIZE : n=10pcs
IPA, 5min.
2.0
1.5
1.0
0.5
0.0
0.5
1.0
1.5
2.0
RESISTANCE
()
R/R (%)
0.1 1 10 100 1k 10k 100k 1M 10M
Fig.13 Resistance to solvents
2.0
1.5
1.0
0.5
0
0.5
1.0
1.5
2.0
RESISTANCE CHANGE
(%)
RESISTANCE
()
0.1 1 10 100 1k 10k 100k 1M 10M
JIS C 5201-1 4.33
SAMPLE SIZE : n=10pcs
ENDURANCE WITH 90mm WIDTH
Fig.14 Bend strength of
the end face plating
Appendix
Appendix1-Rev1.1
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

MCR18EZHF2493

Mfr. #:
Manufacturer:
Description:
RES SMD 249K OHM 1% 1/4W 1206
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union