MPC8379VRALG Datasheet MPC8378CVRALGA, MPC8377VRAGDA, MPC8378CVRAGDA | P1-P2

Overview

Today’s small-to-medium business (SMB) and

consumer applications are driving the need for

highly integrated and cost effective solutions

that deliver high performance. The next

generation PowerQUICC

II Pro MPC837x

family provides an e300 core, built on Power

Architecture

technology, integrated with PCI

Express

and Serial-ATA (SATA) controllers,

as well as dual Gigabit Ethernet controllers,

to specifically address the needs of SMB and

consumer applications. The new MPC837x

family, based in 90 nm process technology,

provides high integration that simplifies board

design and offers a cost-effective solution that

is critical for applications such as wireless

access points, printers, network attached

storage and SMB routers.

e300 Platform Built on Power

Architecture Technology

The next generation MPC837x family utilizes

the 32-bit superscalar e300 core. It integrates

two integer units and a floating-point unit,

making it ideal for computational applications.

It supports 32 KB L1 data and instruction

cache, and has an operating frequency from

400 MHz to 800 MHz. The MPC837x family is

software compatible with existing 603e

core-based products.

Integrated Fabric Controllers

(PCI Express & Serial-ATA)

A key differentiator for the MPC837x family is

the integration of PCI Express and Serial-ATA

(SATA), which reduces the number of external

controller chips and provides customers with

a cost-effective solution. The PCI Express

controller is revision 1.0a compatible

and supports either x1 or x2 widths,

making it an excellent choice for wireless

access points and low-end printers. The

integrated SATA controllers support both

SATA I and II data rates (1.5 and 3.0 Gbaud),

providing integrated support for hard disk

drive applications such as network

attached storage.

Key Advantages

• Highperformancee300coreoperatingup

to 800 MHz with 32 KB L1 cache

• IntegratedPCIExpressandSATA

controllers providing a cost-effective

System-on-Chip (SoC) solution

• Keynetworkingcapabilitiesenabledby

dual Gigabit Ethernet ports

• Integratedsecurityengine

Integrated Communications Processors

MPC837x PowerQUICC

II Pro

Technical Specifications

• e300corebuiltonPower

Architecture technology

Operating from 400 to 800 MHz

Integrated floating point and dual

integer units

32 KB L1 data and instruction cache

with parity checking

• MemoryController

32- or 64-bit DDR1/2 memory controller,

up to 400 MHz data rate

• I/OSupport

Dual 10/100/1000 Ethernet Controllers

with support for MII, RMII, RGMII, RTBI

and SGMII

·· Support for IEEE

1588

USB 2.0 host and device controller

32-bit PCI interface operating up to

66 MHz, Rev 2.3 compatible

PCI Express with two interfaces support

x1 and x2 widths

Integrated SATA controllers with support

for SATA I and II (1.5 Gbps and 3 Gbps),

• IntegratedSecurity(optional,indicatedwith

an E in the device number)

Public Key Encryption unit supports RSA

and Diffie Hellman

Data Encryption Standard Execution

Unit supports DES/3DES, ECB, CBC

and OFB modes

Advanced Encryption Standard Unit

supports key lengths up to 256b, and

supports ECB, CBC, CTR, CCM, GCM,

CMAC, OFB, CFB and LRW

Message Digest Execution unit supports

HSA1/2 and SHA-384/512

ARC Four Execution Unit, Kasumi

Execution Unit and CRC Execution Unit

XOR acceleration

• AdditionalSupport

An enhanced local bus controller

with support for boot from NAND

and NOR flash

4-channel DMA controller

Dual I

C controller, DUART, SPI interface

Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc.

in the U.S. and other countries. All other product or service names are the property of their respective owners.

The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are

Document Number: MPC837XFFS

REV 1

Learn More:

For current information about Freescale

products and documentation, please visit

www.freescale.com.

ANG = 800/400

MPC837xE PowerQUICC

II Pro Family MPC8379E MPC8378E MPC8377E

Core e300 e300 e300

CPU Speed 400, 533, 667, 800 MHz 400, 533, 667, 800 MHz 400, 533, 667, 800 MHz

L1 I/D Cache 32 KB 32 KB 32 KB

Memory Controller 32/64-bit DDR/2 up to 400 MHz 32/64-bit DDR/2 up to 400 MHz 32/64-bit DDR/2 up to 400 MHz

Local Bus 32-bit with NAND boot support 32-bit with NAND boot support 32-bit with NAND boot support

PCI 32-bit up to 66 MHz (2.3) 32-bit up to 66 MHz (2.3) 32-bit up to 66 MHz (2.3)

PCI Express

– 2x1 or 1x2 2x1 or 1x2

SATA 4 x 1 SATA 2.0 with PHY – 2 x 1 SATA 2.0 with PHY

Ethernet

Two 10/100/1000

(RGMII, RTBI, RMII, MII)

Two 10/100/1000

(SGMII, RGMII, RTBI, RMII, MII)

Two 10/100/1000

(RGMII, RTBI, RMII, MII)

USB One 2.0 Host or Device One 2.0 Host or Device One 2.0 Host or Device

Security E version only E version only E version only

Additional Interfaces 2 x UART, 2 x I

C, SPI 2 x UART, 2 x I

C, SPI

Interrupt Controller Yes Yes Yes

Package 689 Te PBGA 689 Te PBGA 689 Te PBGA

P1-P2

MPC8379VRALG

Mfr. #:

Buy MPC8379VRALG

Manufacturer:

NXP / Freescale

Description:

Microprocessors - MPU PBGA W/O ENCR

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MPC8379VRALG

MPC8379VRALG

Products related to this Datasheet