AHA226M06B12T-F

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AHA
SMT Aluminum Electrolytic Capacitors -55 °C to +105 °C - Long Life
Typical Performance Curves
0.01
0.1
1
10
100
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
–40°C
0°C
25°C
65°C
85°C
45°C
–20°C
105°C
–55°C
0.1
1
10
100
1000
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
–40° C
–20° C
0° C
25° C
45° C
85° C
65° C
105° C
–55° C
0
0.2
0.4
0.6
0.8
1
1.2
1.4
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
65° C
25° C
85° C
0°C
105° C
–40° C
45°
–20° C
–55° C
Capacitance vs. Temperature & Frequency
1500 µF @ 6.3 Vdc (10 X 10.2 mm)
ESR vs. Temperature and Frequency
Impedance vs. Temperature and Frequency
Frequency (Hz)
Frequency (Hz)
Frequency (Hz)
Frequency (Hz)
Frequency (Hz)
Frequency (Hz)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
65° C
25° C
85° C
0°C
105° C
–40° C
45°
–20° C
–55° C
0.1
1
10
100
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
–40°C
–20°C
0°C
25°C
45°C
85°C
65°C
105°C
–55°C
0.01
0.1
1
10
100
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
–40°C
0°C
25°C
65°C
85°C
45°C
–20°C
105°C
–55°C
Capacitance vs. Temperature & Frequency
ESR vs. Temperature and Frequency
Impedance vs. Temperature and Frequency
470 µF @ 16 Vdc (10 X 10.2 mm)
1500
µF @ 6.3 Vdc (10 X 10.2 mm)
1500
µF @ 6.3 Vdc (10 X 10.2 mm)
470
µF @ 16 Vdc (10 X 10.2 mm)
470
µF @ 16 Vdc (10 X 10.2 mm)
Type AHA
SMT Aluminum Electrolytic Capacitors -55 °C to +105 °C - Long Life
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
0
0.2
0.4
0.6
0.8
1
1.2
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
65°C
25°C
85°C
0°C
105°C
–40°C
45°C
–20°C
–55°C
Capacitance vs. Temperature & Frequency
Frequency (Hz)
220
µF @ 50 Vdc (10 X 10.2 mm)
ESR vs. Temperature and Frequency
0.1
1
10
100
1000
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
–40° C
–20° C
0° C
25°C
45°C
85°C
65°C
105° C
–55° C
Frequency (Hz)
220µF @ 50 Vdc (10 X 10.2 mm)
0.01
0.1
1
10
100
10 100 1,000 10,000 100,000 1,000,000
Ratio to 25°C, 120 Hz Value
–40° C
0° C
25° C
65° C
85° C
45° C
–20° C
105° C
–55° C
Impedance vs. Temperature and Frequency
220 µF @ 50 Vdc (10 X 10.2 mm)
Frequency (Hz)
-30
-25
-20
-15
-10
-5
0
5
10
0 250 500 750 1,000 1,250 1,500 1,750 2,000
Capacitance Change (%)
10 µF@ 16 Vdc (4 x 5.4 mm)
47 µF@ 16 Vdc ( 6.3 x 5.4 mm)
330 µF @ 16 Vdc (10 x 10.2 mm)
Capacitance Change vs Time
Time (Hours)
See SMT application guide for land pattern, tape and reel specications, and cleaning information.
C a s e
Code
Peak
Temperature
(°C)
M a x . T i m e
at or above 200°C
(sec.)
Number
of Reow
Processes
B, C, D, X 250 60 1
E, F, G 235 60 1
Reow Soldering Temperature Prole for Part Numbers Ending in –F
120 seconds
Preheat
Maximum
Time @ 200 °C
(see chart)
T
ime
160 °C
200 °C
Peak
Temp.
(see chart)
5 seconds
maximum
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AHA
SMT Aluminum Electrolytic Capacitors -55 °C to +105 °C - Long Life
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, conrming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specic customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.

AHA226M06B12T-F

Mfr. #:
Manufacturer:
Cornell Dubilier (CDE)
Description:
Aluminum Electrolytic Capacitors - SMD 22uF 6.3Volts AEC-Q200
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union