Datasheet for part number CA3101E20-8SB02
Our Catalog Part Number: CA3101E20-8S-B-02
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet Connector with bayonet coupling
Shell Style Cable connecting plug
Endbell Style Endbell for heatshrink boots
Gender Socket
Shell Size 20
Contact Arrangement 20-8
Number of contacts 2 contacts size 8, 4 contacts size 16
Contact Type AWG Crimp
Contact Plating Hard silver
Contacts installed not assembled, packed separately
Shielding no
Contact Rating at +20 °C (68 °F)
(Size 15/15S/16/16S)
22 A
Contact Rating at +20 °C (68 °F)
(Size 60/100/8)
74 A
Contact Resistance
(Size 15/15S/16/16S)
6 mΩ
Contact Resistance (Size 60/100/8) 1 mΩ
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 1050 Vrms
Air and Creepage Paths (Min) 0,7 mm
Ambient Temperature
Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions
IP67 and IP68 (1 bar pressure after 12 hrs) acc. to
DIN 40 050
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact
(Size 15/15S/16/16S)
1,0 N
Sep. Force per Contact (Size 60/100/8) 3,0 N
Gage
For infos on Gage please see catalog
VG95234, part 1
Coupling Torque Closing: 9 Nm max / Opening: 0,7 Nm min
Contact Retention
(Size 15/15S/16/16S)
35 N
Contact Retention (Size 60/100/8) 80 N
Shell Material Aluminium alloy
Shell Plating
Olive drab chromate over cadmium plating
(conductive)
Insulator and Grommet Material CR-Elastomere
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Specifications and dimensions subject to change.
Page 1 of
