Spartan-IIE 1.8V FPGA Automotive XA Product Family: Introduction and Ordering Infor9/20/2003ation
4 www.xilinx.com DS106-1 (v1.7) October 18, 2004
1-800-255-7778 Preliminary Product Specification
R
Recommended Operating Conditions
DC Characteristics Over Operating
Conditions
Spartan-IIE Product Availability
Table 2 shows the package and speed grades available for
Spartan-IIE family devices. Tabl e 3 shows the maximum
user I/Os available on the device and the number of user
I/Os available for each device/package combination.
Symbol Description Min Max Units
T
J
Junction temperature –40 125 ° C
V
CCINT
Supply voltage relative to GND
(1)
1.8 – 5% 1.8 + 5% V
V
CCO
Supply voltage relative to GND
(2)
1.2 3.6 V
T
IN
Input signal transition time
(3)
-250ns
Notes:
1. Functional operation is guaranteed down to a minimum V
CCINT
of 1.62V (Nominal V
CCINT
–10%). For every 50 mV reduction in V
CCINT
below 1.71V (nominal V
CCINT
–5%), all delay parameters increase by 3%.
2. Minimum and maximum values for V
CCO
vary according to the I/O standard selected.
3. Input and output measurement threshold is ~50% of V
CCO
.
Symbol Description Min Max Units
I
CCINTQ
Quiescent V
CCINT
supply current
(1)
XA2S50E - 200 mA
XA2S100E - 350 mA
XA2S150E - 450 mA
XA2S200E - 550 mA
XA2S300E - 650 mA
Notes:
1. With no output current loads, no active pull-up resistors, and all I/O pins 3-stated and floating.
Table 2:
Spartan-IIE Package and Speed Grade Availability
Device
Pins 144 256
Type Plastic TQFP
Fine Pitch
BGA
Code TQ144 FT256
XA2S50E -6 I,Q
XA2S100E -6 I,Q
XA2S150E -6 - I,Q
XA2S200E -6 - I,Q
XA2S300E -6 - I,Q
Notes:
1. Q = –40° C to +125° C (T
J
)
2. I = –40° C to +100° C (T
J
)
