P10113TCMWCQ22

L–
18
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
Models Available
P Series
4 Tumbler Snap-in Switchlocks
Features/Benefits
Snap-in mounting
Multi-pole and multi-position
Positive detent
Typical Applications
Computers
Communication equipment
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC;
1 AMP @ 250 V AC (UL) See page L-20 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONT
ACT RESISTANCE: Below 10 m typ. initial @
2-4 V DC, 100 mA for both silver and gold plated contacts.
INSULATION RESISTANCE: 10
9
min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º or 90º, 2-3 positions.
Materials
SWITCH HOUSING & LOCK: One piece construction,
6/6 Nylon (UL 94V
-2), black
4 disc tumbler mechanism.
KEYS: One nickel plated brass key and one key with insert
molded plastic head.
TUMBLERS: Disc tumblers, brass.
CONTACTS & TERMINALS: Q contact material: Copper, silver
plated. See page L-20 for additional contact materials.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center
.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L–19 and L–21. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
P10113
SP
,
90º Index,
keypull pos. 1
P20113 DP, 90º Index, keypull pos. 1 & 2
P100AF SP, 45º Index, keypull pos. 1, 2 & 3
P200AF DP
, 45º Index, keypull pos. 1, 2 & 3
P1011U SP
,
90º Index,
keypull pos. 1 & 2
Contact Material
Q
Silver
G Gold over silver
Keying
2
Two nickel plated brass keys
T One nickel plated brass key
with insert molded plastic
square head and one
nickel pla
ted brass key
Lock Finish
M
Plastic lock with ma
tte finish
Terminations
03
Solder lug
WC Wire lead
Lock Color
2
Black
Lock T
ype
C
4 tumbler lock with detent
Key Color
2
Black
NONE Nickel pla
ted brass
NOYES
1 NICKEL PLATED BRASS KEYS, WITH
PLASTIC INSER
T MOLDED SQUARE HEAD &
1 NICKEL PLATED BRASS KEY
T
NOYES
2 NICKEL PLATED BRASS KEYS
2
CODE NO.
ON LOCK
CODE NO.
ON KEY
KEYING
OPTIONS
OPTION
CODE
L–19
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
KEYING
A126
.798
(20,26)
1.635
(41,52)
.775
(19,68)
NICKEL PLATED BRASS KEY
Key part number: 115140126
Code number on this side,
logo on opposite side.
TERMINAL NUMBERS
MOLDED ON HOUSING
= Detent Positions (45º or 90º )
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
Terminal numbers
molded on housing.
Part number shown: P100AFTCM03Q22
NOTE: All orders keyed alike with
code number on key. For more than
one key code, replacement keys, or
other special featur
es, consult
Customer Service Center
.
All models
with all options when ordered with ‘Q’ contact material.
P Series
4 Tumbler Snap-in Switchlocks
SWITCH AND LOCK FUNCTION
Positions 1, 2 & 3
1-2
1-2, 5-6
8-1
8-1, 4-5
P100AF
P200AF
DP
Pos
ition 1
1-3
1-3, 5-7
8-1
8-1, 4-5
P10113
P20113
SP
DP
IND
EXING
LOCK
CON
FIGURATION
KEY PULL
POSI
TIONS
CONNECTED TERMINALS
POS.
1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
90º
2-3
2-3, 6-7
45º
Positions 1 & 2
1-38-1
P1011U
SP
90º
.948
(24,07)
1.766
(44,85)
.775
(19,68)
NICKEL PLATED BRASS KEY WITH
PLASTIC INSERT MOLDED SQUARE HEAD
Key part number: 11599112602
POS. 1
POS. 3
POS. 2
L–
20
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
L
Switchlock
CONTACT AND
OPTION
CODE
TERMINAL MATERIAL
RATING
Q
4 AMPS @ 125 V AC; 1 AMP @ 250 V AC (UL/CSA)
LOW LEVEL/DRY CIRCUIT
OR POWER
G
SILVER
2
POWER
0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC;
1 AMP @ 250 V AC (UL/CSA)
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES
YES
YES
YES
GOLD OVER SILVER
3
.020 THK.
(0,51)
.080
(2,03)
.046
(1,17)
.085
(2,16)
.246
(6,24)
.100
(2,54)
PC MOUNTING
PANEL MOUNTING
Panel Thickness: .100-.200 (2,54-5,08)
P Series
4 Tumbler Snap-in Switchlocks
LOCK TYPE
C
4 TUMBLER LOCK WITH DETENT
LOCK FINISH
M
PLASTIC LOCK WITH MATTE FINISH
TERMINATIONS
03
SOLDER LUG
WC
WIRE LEAD
CONTACT MATERIAL
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options)
3
CONTACTS & TERMINALS: Copper, with gold plate over silver plate termination
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
All models with all options when ordered
with ‘Q’ contact material.
OPTION
CODE
LOCK
COLOR
BLACK
2
Black wire standard, other colors and
lengths available, consult Customer
Service Center. UL style 1015.

P10113TCMWCQ22

Mfr. #:
Manufacturer:
Description:
Switch Key Lock SPDT 90° Flat Key 4A 250VAC Wire Lead Panel Mount
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union