TMC025100R0FE02 Datasheet TMC00510R00FE02, TMC050R3000FE02, TMC050300R0FE02 | P4-P5

TMC

www.vishay.com

Vishay Huntington

Revision: 23-Jun-16

Document Number: 31806

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MATERIAL SPECIFICATIONS

Element: copper-nickel alloy or nickel-chrome alloy,

depending on resistance value

Core: ceramic, steatite or alumina, depending on physical

size

Encapsulant: silicone molded construction

Housing: aluminum with hard anodic coating

End Caps: stainless steel

Standard Terminals: For TMC005 through TMC050 size

terminal finish - Lead (Pb)-free is Ni/Pd/Au, finish is on

copper clad steel core terminal. For TMC100 and TMC250

terminals are threaded stainless steel.

Part Marking: HEI, model, wattage, value, tolerance, date

code

TMC NON-INDUCTIVE

Models of equivalent physical and electrical specifications

are available with non-inductive (Ayrton-Perry) winding.

They are identified by model number with special

(TMC005…NI, for example).

SPECIAL MODIFICATIONS

A number of special modifications to the aluminum housed

resistor style are available upon request. Special

modifications include:

• Terminal configurations and materials

• Resistance values and tolerances

• Low resistance temperature coefficient (RTC)

• Housing configuration

• Threaded mounting holes

• Preconditioning and other additional testing

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS

Thermal Shock Rated power applied until thermally stable, then a minimum of 15 min at -55 °C ± (0.5 % + 0.05 ) R

Short Time Overload 5x rated power for 5 s ± (0.5 % + 0.05 ) R

Dielectric Withstanding 

Voltage

1000 V

RMS

TMC005, TMC010 and TMC025; 2000 V

RMS

for TMC050;

4500 V

RMS

for TMC100 and TMC250; duration 1 min

± (0.2 % + 0.05 ) R

High Temperature Storage 250 °C for 2 h ± (0.5 % + 0.05 ) R

Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (1.0 % + 0.05 ) R

Shock, Specified Pulse MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks ± (0.2 % + 0.05 ) R

Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.2 % + 0.05 ) R

Load Life 1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.05 ) R

Terminal Strength 30 s, 5 pound pull test for TMC005 and TMC010, 10 pound pull test for other sizes ± (0.2 % + 0.05 ) R

Legal Disclaimer Notice

www.vishay.com

Vishay

Revision: 08-Feb-17

Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

P1-P3 P4-P5

TMC025100R0FE02

Mfr. #:

Buy TMC025100R0FE02

Manufacturer:

Vishay / Dale

Description:

Wirewound Resistors - Chassis Mount 25watt 100ohms 1%

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

TMC025100R0FE02

TMC025100R0FE02

Products related to this Datasheet