OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FTLX6811MCC

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
Finisar Corporation October 2015 Rev. B1 Page 1
Product Specification
+1600 ps/nm (80km) Tunable XFP Optical Transceiver
FTLX6811MCC-xx and FTLX6814MCC-xx
PRODUCT FEATURES
• Supports 8.5Gb/s to 11.35Gb/s
• -300 to +1600 ps/nm Dispersion
Tolerance
• Supports 50GHz ITU-based
channel spacing (C-Band) with a
wavelength locker
• Monolithic MZM Tunable TOSA
• Temperature range: -5°C to 70°C
• RoHS-6 Compliant (lead-free)
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• High performance APD Receiver
• Adjustable receiver threshold with
option for automatic optimization
through FEC feedback
APPLICATIONS
• DWDM 10Gb/s SONET/SDH
• DWDM 10Gb/s Ethernet & 10Gb/s
Fibre Channel
• DWDM 10Gb/s SONET/SDH w/FEC
• DWDM 10Gb/s Ethernet and 10Gb/s
Fibre Channel w/FEC
Finisar’s FTLX6811MCC-xx Small Form Factor 10Gb/s (XFP) transceiver complies
with the XFP Multi-Source Agreement (MSA) Specification
1
. It supports amplified
DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel
applications over 80km of fiber without dispersion compensation. Digital diagnostics
functions are available via a 2-wire serial interface, as specified in the XFP MSA. The
optical transceiver is compliant per the RoHS Directive 2011/65/EU
3
. See Finisar
Application Note AN-2038 for more details
4
.
PRODUCT SELECTION
Standard Performance: FTLX6811MCC-xx
High Performance: FTLX6814MCC-xx
xx: Customer specific
FTLX6811MCC and FTLX6814MCC T-XFP Product Specification
Finisar Corporation October 2015 Rev. B1 Page 2
I. Pin Descriptions
Pin
Logic
Symbol
Name/Description
Ref.
1
GND
Module Ground
1
2
VEE5
Optional –5.2 Power Supply – Not used
3
LVTTL-I
Mod-Desel
Module De-select; When held low allows the module to
respond to 2-wire serial interface commands
4
LVTTL-O
Interrupt
Interrupt (bar); Indicates presence of an important condition
which can be read over the serial 2-wire interface
2
5
LVTTL-I
TX_DIS
Transmitter Disable; Transmitter laser source turned off
6
VCC5
+5 Power Supply
7
GND
Module Ground
1
8
VCC3
+3.3V Power Supply
9
VCC3
+3.3V Power Supply
10
LVTTL-I
SCL
Serial 2-wire interface clock
2
11
LVTTL-
I/O
SDA
Serial 2-wire interface data line
2
12
LVTTL-O
Mod_Abs
Module Absent; Indicates module is not present. Grounded
in the module.
2
13
LVTTL-O
Mod_NR
Module Not Ready; Finisar defines it as a logical OR
between RX_LOS and Loss of Lock in TX/RX.
2
14
LVTTL-O
RX_LOS
Receiver Loss of Signal indicator
2
15
GND
Module Ground
1
16
GND
Module Ground
1
17
CML-O
RD-
Receiver inverted data output
18
CML-O
RD+
Receiver non-inverted data output
19
GND
Module Ground
1
20
VCC2
+1.8V Power Supply – Not used
21
LVTTL-I
P_Down/RST
Power Down; When high, places the module in the low
power stand-by mode and on the falling edge of P_Down
initiates a module reset
Reset; The falling edge initiates a complete reset of the
module including the 2-wire serial interface, equivalent to a
power cycle.
22
VCC2
+1.8V Power Supply – Not used
23
GND
Module Ground
1
24
PECL-I
RefCLK+
Reference Clock non-inverted input, AC coupled on the
host board - Required
3
25
PECL-I
RefCLK-
Reference Clock inverted input, AC coupled on the host
board - Recommended
3
26
GND
Module Ground
1
27
GND
Module Ground
1
28
CML-I
TD-
Transmitter inverted data input
29
CML-I
TD+
Transmitter non-inverted data input
30
GND
Module Ground
1
Notes
:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Open collector; should be pulled up with 4.7k – 10kohms on host board to a voltage between 3.15V
and 3.6V.
3. Reference clock is single ended and requires a non-inverted input on PIN 24. Finisar recommends also
using the inverted input on PIN 25 for noise considerations. Version not requiring Host board
Reference Clock is also available upon request.
FTLX6811MCC and FTLX6814MCC T-XFP Product Specification
Finisar Corporation October 2015 Rev. B1 Page 3
Diagram of Host Board Connector Block Pin Numbers and Names
II. Absolute Maximum Ratings
Parameter
Min
Typ
Unit
Ref.
Maximum Supply Voltage #1
-0.5
V
Maximum Supply Voltage #2
-0.5
V
Storage Temperature
-40
°C
Case Operating Temperature
-5
°C
Receiver Damage Threshold
(Steady-state as well as transient)
Rdmg
+3
dBm
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

FTLX6811MCC

Mfr. #:
Buy FTLX6811MCC
Manufacturer:
Finisar Corporation
Description:
Fiber Optic Transmitters, Receivers, Transceivers C-Bnd 50GHz APD LC Multi-transcvr Sngl
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet