FL BT SPA
7660_en_01 PHOENIX CONTACT 7
5 FL BT SPA installation/interfaces
Figure 3 View and interfaces of the FL BT SPA
– Mounting holes
Using these holes, you can install the FL BT SPA on a
level surface using two screws (e.g., 84-M3 X 25-8.8
cylinder head screws) (for drill hole distance, see
Figure 1 on page 5).
– Antenna
The device is supplied with a 0 dB omni-directional
antenna. You can exchange the supplied antenna for a
different antenna in compliance with the national
regulations.
– Supply voltage connection
The supply voltage is connected using the 2-pos.
COMBICON connector.
– Button 1 is used to reset the settings for the serial
interface, pressing buttons 1 and 2 resets the device to
the default settings.
– Serial interface - V.24
V.24 (RS-232) interface in D-SUB format (9-pos.).
– Status and diagnostic indicators
The LEDs display the status of the serial and Bluetooth
interfaces.
Mounting holes
Antenna
Supply voltage
connection
Serial
interface
V.24
Diagnostic/
status
indicators
76600002
FL BT SPA
Bluetooth Serial Port Adapter
Ord No.: 2884952
Serial
Bluetooth
Button
1
Button
2
Please note that the depth of the two buttons in
the housing is different.