M500DC 2.5-Inch TCG Enterprise SATA
NAND Flash SSD
MTFDDAK120MBB-1AE16ABYY, MTFDDAK240MBB-1AE16ABYY,
MTFDDAK480MBB-1AE16ABYY, MTFDDAK800MBB-1AE16ABYY
Features
• Micron
®
20nm MLC NAND Flash
• SATA 6 Gb/s interface
• TCG Enterprise Ver 1.0 Final Rev 3.0 compliant self-
encrypting drive (SED)
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
• 512-byte sector size support
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password
login support
• Security erase command set: fast and secure erase
• 120GB performance (steady state)
1, 2
– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 200 MB/s
– Random 4KB read: 63,000 IOPS
– Random 4KB write: 23,000 IOPS
– READ/WRITE latency: 0.50ms/1.5ms (TYP)
• 240GB performance (steady state)
1, 2
– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 330 MB/s
– Random 4KB read: 63,000 IOPS
– Random 4KB write: 33,000 IOPS
– READ/WRITE latency: 0.50ms/1.5ms (TYP)
• 480GB performance (steady state)
1, 2
– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 375 MB/s
– Random 4KB read: 63,000 IOPS
– Random 4KB write: 35,000 IOPS
– READ/WRITE latency: 0.50ms/1.5ms (TYP)
• 800GB performance (steady state)
1, 2
– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 375 MB/s
– Random 4KB read: 65,000 IOPS
– Random 4KB write: 24,000 IOPS
– READ/WRITE latency: 0.50ms/1.5ms (TYP)
• Reliability
– MTTF: 2 million device hours
3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 10
16
bits read
– End-to-end data protection
– Enhanced power-loss data protection with data
protection capacitor monitoring
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Hot-plug capable
• Endurance: Total bytes written (TBW)
– 120GB: 0.5PB; 240GB: 1.0PB; 480GB: 1.9PB;
800GB: 1.9PB
• Capacity
4
(unformatted): 120GB, 240GB, 480GB,
800GB
• Mechanical: 7.0mm height
– SATA connector: 5V ±10%
– 2.5-inch drive: 100.45mm x 69.85mm x 7.0mm
– Conforms to SFF standards
• RoHS-compliant package
• Field-upgradeable firmware
• Power consumption: <6.0W (TYP); <6.3W (TYP) for
800GB
• Operating temperature
– Commercial (0°C to 70°C)
5
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache disabled.
2. 4KB transfers used for READ/WRITE latency
values.
3. The product achieves a MTTF based on pop-
ulation statistics not relevant to individual
units.
4. 1GB = 1 billion bytes; formatted capacity is
less.
5. Drive case temperature.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
M500DC 2.5-Inch NAND Flash SSD
Features
09005aef8629817f
M500DC_2_5_tcg_enterprise.pdf - Rev. C 9/16 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
