74CBTLV16211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet Rev. 7 — 9 November 2016 4 of 17
NXP Semiconductors
74CBTLV16211
24-bit bus switch
6. Functional description
[1] H = HIGH voltage level; L = LOW voltage level.
7. Limiting values
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For TSSOP56 packages: above 55 C the value of P
tot
derates linearly with 8.0 mW/K.
8. Recommended operating conditions
[1] Applies to control signal levels.
1B0 to 1B11 54, 53, 52, 51, 50, 48, 47, 46, 45, 44, 43, 42 independent input or output
2OE
55 output enable input (active-LOW)
1OE
56 output enable input (active-LOW)
Table 2. Pin description
…continued
Symbol Pin Description
Table 3. Function table
[1]
Output enable input OE Function switch
L ON-state
HOFF-state
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +4.6 V
V
I
input voltage
[1]
0.5 +4.6 V
V
SW
switch voltage enable and disable mode
[1]
0.5 V
CC
+ 0.5 V
I
IK
input clamping current V
I
< 0.5 V 50 - mA
I
SK
switch clamping current V
I
< 0.5 V 50 - mA
I
SW
switch current V
SW
= 0 V to V
CC
- 128 mA
I
CC
supply current - +100 mA
I
GND
ground current 100 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 Cto+125C
[2]
- 600 mW
Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 2.3 3.6 V
V
I
input voltage 03.6V
V
SW
switch voltage enable and disable mode 0 V
CC
V
T
amb
ambient temperature 40 +125 C
t/V input transition rise and fall rate V
CC
= 2.3 V to 3.6 V
[1]
0200ns/V
