TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http://www.microsemi.com
HIGH RELIABILITY POWER RECTIFIER
T4-LDS-0136 Rev. 1 (091679) Page 3 of 3
PACKAGE DIMENSIONS
Dimensions
Ltr Inches Millimeters Notes
Min Max Min Max
CH .405 10.29
CD .424 10.77
HF .424 .437 10.77 11.10
HT .075 .175 1.90 4.44
OAH .800 20.32
C .250 6.35 9
φT
.060 1.52
SL .422 .453 10.72 11.51
K 3,5,7
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Units must not be damaged by torque of 15 inch-pounds
applied to 10-32NF-2B nut assembled on thread
4. Diameter of unthreaded portion .189 inch (4.80 mm) max and
.163 inch (4.14 mm) min.
5. Complete threads to extend to within 2.5 threads of seating
plane.
6. Angular orientation of this terminal is undefined.
7. Max pitch diameter of plated threads shall be basic pitch
diameter .169 inch (4.31 mm) reference FED-STD-H28
(Screw Thread Standards for Federal Services.)
8. The A.S.A. thread reference is 10-32UNF2A.
9. Terminal shape is unrestricted.
10. Reversed (anode to stud) units shall be marked with an R
following the last digit in the type number
11. In accordance with ASME Y14.5M, diameters are equivalent to
φx symbology.
Physical dimensions (DO-203AA, formerly DO-4)
1N1202A, 1N1204A, 1N1206A, 1N3671A, 1N3673A and AR versions, and 1N1124A,
1N1126A, 1N1128A, and RA versions 1N3649, 1N3650, and R versions.