RSD-200D-48 Datasheet RSD-200D-12, RSD-200D-24, RSD-200D-48 | P1-P3

SPECIFICATION

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

EFFICIENCY (Typ.)

INPUT

INRUSH CURRENT (Typ.)

SAFETY STANDARDS

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

DC CURRENT (Typ.)

105 ~ 135% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

Compliance to EN55032 (CISPR32) Conduction Emission: Class A, Radiation Emission: Class B, EAC TP TC 020

-40 ~ +55 (no derating) ; +70 @ 60% load by free air convection ; +70 no derating with external base plate, TX class compliance℃℃ ℃

5 ~ 95% RH non-condensing

-40 ~ +85 , 5 ~ 95% RH non-condensing℃

±℃ ℃0.03%/ (0 ~ 50 )

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ; Mounting : compliance to IEC61373

218.2K hrs min. MIL-HDBK-217F (25 )℃

191*86*40mm (L*W*H)

0.94Kg; 12pcs/12.3Kg/0.73CUFT

File Name:RSD-200-SPEC 2018-01-15

200W Railway Single Output DC-DC Converter

■ Features :

RSD-200 series

RIPPLE & NOISE (max.) Note.2

VOLTAGE TOLERANCE Note.3

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:4KVDC I/P-FG:2.5KVDC O/P-FG:2.5KVDC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

SAFETY &

EMC

(Note 4)

ENVIRONMENT

PROTECTION

1. All parameters NOT specially mentioned are measured at 24,48,110VDC input, rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on

a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to

perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)

5. Strongly recommended that external output capacitance should not exceed 5000uF. :(Only for RSD-200-12)

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

12V 24V 12V 24V 12V 24V

16.7A 8.4A 16.7A 8.4A 16.7A 8.4A

0 ~ 16.7A 0 ~ 8.4A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 16.7A 0 ~ 8.4A

200.4W 201.6W 200.4W 201.6W 200.4W 201.6W

120mVp-p 150mVp-p 120mVp-p 150mVp-p 120mVp-p 150mVp-p

±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0%

±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2%

±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%

800ms, 50ms at full load

89% 89% 91% 91% 91% 91%

9.6A/24V 9.6A/24V

45A/48VDC

4.8A/48V 4.8A/48V

45A/110VDC

2.1A/110V 2.1A/110V

45A/24VDC

Compliance to EN50155 and EN45545-2 railway standard

2:1 wide input range

Protections: Short circuit / Overload / Over voltage / Over temperature

/ Input reverse polarity

4000VDC I/O isolation

Cooling by free air convection

Half encapsulated

Built-in constant current limiting circuit

1U low profile 40mm

All using 105 long life electrolytic capacitors℃

LED indicator for power on

100% full load burn-in test

3 years warranty

13.8 ~ 16.2V 13.8 ~ 16.2V 13.8 ~ 16.2V27.6 ~ 32.4V 27.6 ~ 32.4V 27.6 ~ 32.4V

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

48V 48V 48V

4.2A 4.2A 4.2A

0 ~ 4.2A 0 ~ 4.2A 0 ~ 4.2A

201.6W 201.6W 201.6W

180mVp-p 180mVp-p 180mVp-p

±2.0% ±2.0% ±2.0%

±0.5% ±0.5% ±0.5%

±1.0% ±1.0% ±1.0%

89%

9.6A/24V

91% 91%

4.8A/48V 2.1A/110V

55.2 ~ 64.8V 55.2 ~ 64.8V 55.2 ~ 64.8V

HOLD UP TIME (Typ.) B/C- type comply with S1 level @ full load, comply with S2 level @ 70% load ; D-type comply with S2 level @ full load

EMC IMMUNITY

EMC EMISSION

VOLTAGE

RANGE

16.8 ~ 31.2VDC

14.4 ~ 33.6VDC

33.6 ~ 62.4VDC

28.8 ~ 67.2VDC

67.2 ~ 143VDC

57.6 ~ 154VDC

CONTINUOUS

1 SEC.

IEC60950-1(LVD) EAC TP TC 004

, approved

Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020

RAILWAY STANDARD

EN50155 / IEC60571 including IEC61373 for shock & vibration, EN50121-3-2 for EMC ; EN45545-2 for fire protection

RSD-200B-24RSD-200B-12 RSD-200C-24RSD-200C-12

RSD-200D-24

RSD-200D-12

RSD-200B-48 RSD-200C-48

RSD-200D-48

Protection type : Shut down o/p voltage, re-power on to recover

Mechanical Specification

Case No.203A Unit:mm

fosc : 130KHz

Block Diagram

CIRCUIT

DETECTION

O.L.P.

O.T.P.

O.V.P.

EMI

FILTER

POWER

SWITCHING

FILTER

RECTIFIERS

-V

I/P

CONTROL

PWM

Input Terminal Pin No. Assignment :

Output Terminal Pin No. Assignment :

Pin No. Pin No.

Assignment Assignment

DC INPUT V+

DC OUTPUT -V

DC INPUT V-

DC OUTPUT +V

Input Fuse

There are one or two fuses connected in series to the positive input line, which are used to protect against abnormal surge. Fuse specifications of each model are shown

as below.

Type

Fuse Type

Time-Lag

Reference and Rating

2*Conquer UDA-A, 10A, 250V

Conquer UDA-A, 10A, 250V

Conquer UDA-A, 5A, 250V

200W Railway Single Output DC-DC Converter

RSD-200 series

File Name:RSD-200-SPEC 2018-01-15

9.5

8.2

I/P

4-R2.1

LED

183

191

1310

2-R2.1

O/P

183

15max.

10max.

14.0

13.1

12 13 14 15 16 17

Turn O n

Turn O ff

57.3

54.1

50 55 60 65 70

Tur n O n

Tur n O ff

27.925.9

25 27 29 31 33 35

Tur n O n

Tur n O ff

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0ms 10ms 20ms 30ms 40ms 50ms 60ms 70ms 80ms

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0ms 10ms 20ms 30ms 40ms 50ms 60ms 70ms 80ms

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0ms 10ms 20ms 30ms 40ms 50ms 60ms 70ms 80ms

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0ms 10ms 20ms 30ms 40ms 50ms 60ms 70ms 80ms

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0ms 10ms 20ms 30ms 40ms 50ms 60ms 70ms 80ms

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0ms 10ms 20ms 30ms 40ms 50ms 60ms 70ms 80ms

Input Reverse Polarity Protection

Input Range and Transient Ability

Input Under-Voltage Protection

Inrush Current

There is a MOSFET connected in series to the negative input line. If the input polarity is connected reversely, the MOSFET opens and there will be no output to protect

the unit.

The series has a wide range input capability. Within 30% of rated input voltage, it can be executed at full-load operation and operate properly; with 40% of rated input± ±

voltage, it can withstand that for 1 second.

If input voltage drops below Vimin, the internal control IC shuts down and there is no output voltage. It recovers automatically when input voltage reaches above Vimin,

please refer to the cruve below.

Inrush current is suppressed by a resistor during the initial start-up, and then the resistor is bypassed by a MOSFET to reduce power consumption after accomplishing

the start-up.

TIME

LOAD

Vin Vin Vin

Vo Vo Vo

200W Railway Single Output DC-DC Converter

RSD-200 series

File Name:RSD-200-SPEC 2018-01-15

Hold-up Time

Output Voltage Adjustment

D type is in compliance with S2 level, while B and C types are in compliance with S1 level at full load output condition. To fulfil the requirements of S2 level, B and C

This function is optional, which the standard product does not have it. If you do need the function, please contact MW for details.

types require de-rating their output load to 70%, please refer to the curve diagrams below.

RSD-200B-12

RSD-200B-24

RSD-200C-12

RSD-200B-24

RSD-200C-24

RSD-200B-48

RSD-200D-24

RSD-200C-48

P1-P3 P4-P6 P7-P7

RSD-200D-48

Mfr. #:

Buy RSD-200D-48

Manufacturer:

Description:

Isolated DC/DC Converters 67.2-143Vin 48Vout 4.2A Iso DC-DC

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

RSD-200D-48

RSD-200D-48

Products related to this Datasheet