SPEC NO: DSAO4528 REV NO: V.1B DATE: AUG/01/2015 PAGE: 2 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015144
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 2mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APHBM2012LQBDCGKC
Blue (InGaN)
Water Clear
6 12
Green (AlGaInP) 1.2 2
120
°
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Blue
Green
460
574
nm I
F=2mA
λD [1] Dominant Wavelength
Blue
Green
465
570
nm I
F=2mA
Δλ1/2 Spectral Line Half-width
Blue
Green
25
20
nm I
F=2mA
C Capacitance
Blue
Green
100
15
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Blue
Green
2.65
1.9
3
2.1
V I
F=2mA
I
R Reverse Current
Blue
Green
50
10
uA V
R = 5V
Min.
2.2
1.5
Parameter Blue Green Units
Power dissipation 90 63 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 150 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM) 250 V 3000
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
