HCM1305 Recommended for New Designs
See Data Sheet 4371
Applications
• Notebook power
• VRM, multi-phase buck regulator
• DC-DC converters
• PC workstations/Servers/Desktop
• Routers
Environmental Data
• Storage temperature range: -55°C to +125°C
• Operating temperature range: -55°C to +125°C
(range is application specific)
• Solder reflow temperature: +260°C max. for 10 seconds maximum
Packaging
• Supplied in tape and reel packaging, 400 parts per reel,
13” diameter reel
Description
• 125°C maximum temperature operation
• 12.9 x 13.8 x 5.0mm surface mount package
• Magnetically shielded, low EMI
• Pressed powder iron core material
• Enhanced core coating eliminates rusting and provides high insulation
impedance
• Inductance range from 0.47µH to 2.2µH
• Current range from 65.0 Amps to 20 Amps
• Frequency range up to 1MHz
• Black or gray aesthetic color
High Current, Pressed, Power Inductors
HCP1305 Series
0710 BU-SB10742 Page 1 of 3 Data Sheet: 4353
SMD Device
1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.25V, 0.0Adc
2I
rms
: DC current for an approximate ΔT rise of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow and proximity of other
heat generating components will affect the temperature rise. It is recommended the part
temperature not exceed 125°C under worst case operating conditions verified in the end
application.
3I
sat
: Amps for approximately 20% rolloff (@25°C).
4 K-factor: Used to determine B
p-p
for core loss (see graph). B
p-p
= K
*
L
*
ΔI
,
B
p-p
: (Gauss), K:
(K-factor from table), L: (inductance in μH), ΔI (peak-to-peak ripple current in amps).
5 Part Number Definition: HCP1305-xxx-R
• HCP1305 = Product code and size
• xxx= Inductance value in μH, R = decimal point. If no “R” is present, then
third character = # of zeros
• “-R” suffix = RoHS compliant
Product Specifications
Rated OCL
1
I
rms
2
I
sat
3
DCR mΩ@20°C DCR mΩ@20°C
Part Number
5
Inductance (µH) µH ± 20% Amps Amps (Typical) (Maximum) K-factor
4
HCP1305-R47-R 0.47 0.47 38 65 1.1 1.3 181
HCP1305-R56-R 0.56 0.56 36 55 1.3 1.5 130
HCP1305-1R0-R 1.0 1.0 29 50 2.1 2.5 134
HCP1305-1R5-R 1.5 1.5 23 48 3.4 4.1 105
HCP1305-2R2-R 2.2 2.2 20 32 4.6 5.5 77