Contact Us | Site Feedback | Terms of Use | Privacy Policy
Copyright © 2013 ARM Ltd and ARM Germany GmbH. All rights reserved.
MCB134
Evaluation Board
The Keil MCB1343 Evaluation Board introduces the new LPC134x family of ARM Cortex-M3 processor-based devices,
allowing you to create and test working programs for this advanced architecture.
The MCB1343 has a wide range of interfaces making it a great starting point for your next Cortex-M3 project.
MCB1343 Features
◾ 72MHz LPC1343FBD48 ARM Cortex™-M3 processor-based MCU in 48-pin LQFP
◾ On-Chip Memory: 32KB Flash & 8KB RAM
◾ External Memory: 8KB EEPROM accessible via I C bus
◾ Solar Power - can optionally provide power to the board
◾ Temperature Sensor - digital sensor for monitoring board temperature
◾ USB 2.0 Full Speed interface and USB Micro AB connector
◾ SPI Port via 20-pin Molex connector
◾ 42 GPIO pins
◾ 10 pin Cortex debug (0.05 inch connector)
Ordering Information
Part numbers are
◾ MCB1343: MCB1343 Evaluation Board
Evaluation Software
The MCB1343 Evaluation Board includes the MDK-ARM Evaluation Tools. These tools help you get started writing programs and testing the
microcontroller and its capabilities. Sample applications that run on the MCB1000 and a Quickstart guide are included. For programming and application
debugging a ULINK family USB-JTAG Adapter is required.
◾ The MCB1343 will be available during the second-half of 2010.
2
Page 1 of 1Keil MCB1343 Evaluation Board Overview
4
20
201
htt
://www.keil.com/mcb1000/mcb1343.as
