SparkFunDangerShield
DEV-11649 RoHS
Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and
equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much
potential; we can’t wait to see what you’re able to do with it! The shield’s features include:
Three linear slide potentiometers connected to the Arduino’s analog pins 0 through 2.
Red and yellow LEDs connected to digital pins 5 and 6 - PWM pins - so you can easily vary
their brightness.
Three momentary push buttons connected up to the Arduino’s digital pins 10 through 12.
Those lines will go low when the buttons are pressed.
A photocell and a temperature sensor, both with analog outputs, are connected to the analog
pins 3 and 4, respectively.
An 8-bit shift register set up to control a blue 7-segment LED.
A buzzer - so you can get sound out of your Arduino
Capacitive Touch pad - Using the CapSense library to sense touch.
This product comes as a kit of parts, which you’ll have to solder into the included PCB. All parts are
through-hole so it should go together relatively easily; but always check your component orientation
before soldering!
