NTCLE100E3
www.vishay.com
Vishay BCcomponents
Revision: 22-Dec-16
16
Document Number: 29049
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REEL SPECIFICATIONS
CHARACTERISTICS OF TAPED PRODUCTS
Minimum pull-out force of the component: 5 N
Minimum peel-off force of adhesive tape: 6 N
Minimum tearing force tape: 15 N
Minimum pull-off force of tape-reel: 5 N
STORAGE CONDITIONS
Storage temperature range: - 25 °C to + 40 °C
Maximum relative humidity: 80 %, non-condensing
TESTS AND REQUIREMENTS
Tests are carried out in accordance with IEC 60068-2 and IEC 60539-1.
Notes
(1)
For R
25
100 k the drift requirement is R/R < 5 %
(2)
For R
25
from 2.2 k to 10 k, requirement is ± 2 % max.
22.5
16
+1
-
0
77 85.6 92
356
max.
18
3
42 ±1
56 max.
Dimensions of the reel
PART NUMBERS AND PACKAGING
PACKING METHOD PART NUMBERS QUANTITY
Bulk NTCLE100E3....B0(A) 500
Tape and reel
1E pitch
NTCLE100E3....T1(A)
1500 per reel,
2 reels per box
Tape and reel
2E pitch
NTCLE100E3....T2(A)
1500 per reel,
2 reels per box
STABILITY TESTS
IEC 60068-2
TEST METHOD
TEST PROCEDURE REQUIREMENTS
Endurance 25 °C; 1000 h R/R < 1 %
1 Endurance -40 °C; 1000 h R/R < 1 %
60539 (5.25.4) Endurance 500 mW; 55 °C; 1000 h R/R < 3 %
(1)
2 Dry heat, (steady state) 125 °C; 1000 h R/R < 3 %
78 Damp heat (steady state) 56 days at 40 °C; 90 % to 95 % RH R/R < 3 %
14 Rapid change of temperature -40 °C to +125 °C; 50 cycles R/R < 2 %
Other applicable tests
21
Robustness of leads:
Tensile strength
Bending
Loading force 10 N
Loading force 5 N
R/R 1 %
58
Soldering:
Solderability
Resistance to heat
240 °C max.; duration 4 s max.
265 °C max.; duration 5 s max.
R/R 1 %
(2)
27 Impact Free fall; 1 m R/R 1 %
29 Shock 490 m/s; half sinewave R/R 1 %
45
Resistance to solvent
(isopropanol)
Ambient temp for 5 minutes;
5 N with hydrophylic cotton wool
No traces of lacquer
on cotton wool
6Vibration
1.5 mm peak to peak: 10 Hz to 58 Hz
10 gp: 50 Hz to 500 Hz 1 octave/min. 2 h in
each direction in three orthogonal directions
No visible damage
R/R < 1 %
60695-2-2 Inflammability 1980, needle flame test Non-flammable
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 13-Jun-16
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

NTCLE100E3104HB0

Mfr. #:
Manufacturer:
Vishay
Description:
Thermistors - NTC 100Kohms 3% Radial
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union