MBRB4030G, NRVBB4030T4G
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
30 V
Average Rectified Forward Current
(At Rated V
R
) T
C
= +115C (Note 1)
I
F(AV)
40
A
Peak Repetitive Forward Current
(At Rated V
R
, Square Wave, 20 kHz), T
C
= +112C
I
FRM
80
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
I
FSM
300
A
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
I
RRM
2.0 A
Storage Temperature Range T
stg
−65 to +175 C
Operating Junction Temperature Range (Note 2) T
J
−65 to +175 C
Voltage Rate of Change (Rated V
R
) dv/dt 10,000
V/ms
Reverse Energy (Unclamped Inductive Surge), (T
C
= 25C, L = 3.0 mH) W 600 mJ
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Rating applies when pins 1 and 3 are connected.
2. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP
D
/dT
J
< 1/R
q
JA
.
THERMAL CHARACTERISTICS
Characteristic Symbol Value Unit
Thermal Resistance, Junction−to−Case
R
q
JC
1.0 C/W
Thermal Resistance, Junction−to−Ambient (Note 3)
R
q
JA
50 C/W
3. Rating applies when surface mounted on the miniumum pad size recommended.
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Notes 4 and 5), per Device
(I
F
= 20 A, T
C
= + 25C)
(I
F
= 20 A, T
C
= +150C)
(I
F
= 40 A, T
C
= + 25C)
(I
F
= 40 A, T
C
= +150C)
V
F
0.46
0.34
0.55
0.45
V
Maximum Instantaneous Reverse Current (Note 5), per Device
(Rated DC Voltage, T
C
= + 25C)
(Rated DC Voltage, T
C
= +125C)
I
R
0.35
150
mA
4. Rating applies when pins 1 and 3 are connected.
5. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%
ORDERING INFORMATION
Device Package Shipping
†
MBRB4030G D
2
PAK
(Pb−Free)
50 Units / Rail
MBRB4030T4G D
2
PAK
(Pb−Free)
800 Units / Tape & Reel
NRVBB4030T4G D
2
PAK
(Pb−Free)
800 Units / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
