MXD1210
Nonvolatile RAM Controller
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
(T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
CCI
to GND ..........................................................-0.3V to +7.0V
VBATT1 to GND.....................................................-0.3V to +7.0V
VBATT2 to GND.....................................................-0.3V to +7.0V
V
CCO
to GND ................................................-0.3V to (V
S
+ 0.3V)
(V
S
= greater of V
CCI
, VBATT1, VBATT2)
Digital Input and Output
Voltages to GND.....................................-0.3V to (V
CCI
+ 0.3V)
Continuous Power Dissipation (T
A
= +70°C)
8-Pin PDIP (derate 9.09mW/°C above +70°C)..............727mW
8-Pin SO (derate 5.88mW/°C above +70°C).................471mW
8-Pin CERDIP (derate 8.00mW/°C above +70°C).........640mW
16-Pin Wide SO (derate 9.52mW/°C above +70°C) .....762mW
Operating Temperature Range
C Suffix.................................................................0°C to +70°C
E Suffix..............................................................-40°C to +85°C
M Suffix ...........................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
ELECTRICAL CHARACTERISTICS—Normal Supply Mode, TOL = V
CCO
(V
CCI
= +4.75V to +5.5V, TOL = GND; or V
CCI
= +4.5V to +5.5V, TOL = V
CCO
; T
A
= T
MIN
to T
MAX
, unless otherwise noted.)