Serial ATA Flash Drive
APS25AXXxxxx-XTX
3
©2014 Apacer Technology Inc. Rev. 1.3
1. Product Description
1.1 Introduction
Apacer’s SFD25A is a well-balanced solid-state disk (SSD) drive with standard form factor and great
performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed,
making it the ideal companion for heavy-loading industrial or server operations. In regard of reliability, the drive
comes with various implementations including powerful hardware ECC engine, power saving modes, wear
leveling, flash block management, S.M.A.R.T., TRIM, and power failure management.
1.2 Capacity Specification
Table 1-1 Capacity specification
Capacity Total Bytes* Cylinders
Heads Sectors Max LBA*
8 GB 8,012,390,400 15,525 16 63 15,649,200
16 GB 16,013,942,784 16,383 16 63 31,277,232
32 GB 32,017,047,552 16,383 16 63 62,533,296
64 GB 64,023,257,088 16,383 16 63 125,045,424
128 GB 128,035,676,160 16,383 16 63 250,069,680
*Display of total bytes varies from file systems.
**Cylinders, heads or sectors are not applicable for these capacities. Only LBA addressing applies.
LBA count addressed in the table above indicates total user storage capacity and will remain the same throughout the lifespan of
the device. However, the total usable capacity of the SSD is most likely to be less than the total physical capacity because a small
portion of the capacity is reserved for device maintenance usages.
1.3 Performance
Table 1-2 Performance (Standard)
Capacity
Performance
8 GB 16 GB 32 GB 64 GB 128 GB
Sustained Read
(MB/s)
155 155 160 160 160
Sustained Write
(MB/s)
110 145 145 150 150
Table 1-3 Performance (High-speed)
Capacity
Performance
32 GB 64 GB 128 GB
Sustained Read
(MB/s)
530 530 530
Sustained Write
(MB/s)
270 440 445
Random Read
IOPS (4K)
81,000 82,000 82,000
Random Write
IOPS (4K)
62,000 73,000 76,000
Note: Performance varies from flash configurations or host system settings.
IOPS: measured on 8GB span (16777216 sectors Disk Size), 32 Outstanding I/Os (QD=32), Full Random Data pattern,
4KB Align I/Os and test durations 15minutes.
Serial ATA Flash Drive
APS25AXXxxxx-XTX
4
©2014 Apacer Technology Inc. Rev. 1.3
1.4 Pin Assignments
Table 1-4 describes the SFD signal segment, and Table1-5, power segment.
Figure 1-1 SATA Connectors
Table 1-4: Signal segment
Table 1-5: Power segment
Pin
Type
Description
Pin
Signal/Description
S1
GND
P1
Unused (3.3V)
S2
RxP
+ Differential Receive
Signal
P2
Unused (3.3V)
S3
RxN
- Differential Receive
Signal
P3
Unused or Device Sleep*
S4
GND
P4
Ground
S5
TxN
- Differential Transmit
Signal
P5
Ground
S6
TxP
+ Differential Transmit
Signal
P6
Ground
S7
GND
P7
5V
P8
5V
P9
5V
P10
Ground
P11
DAS
P12
Ground
P13
Unused (12V)
P14
Unused (12V)
P15
Unused (12V)
*P3 can be configured as Device Sleep trigger by option
Serial ATA Flash Drive
APS25AXXxxxx-XTX
5
©2014 Apacer Technology Inc. Rev. 1.3
Figure 1-3 SATA Cable/Connector Connection Diagram
The connector on the left represents the Host with TX/RX differential pairs connected to a cable. The connector
on the right shows the Device with TX/RX differential pairs also connected to the cable. Notice also the ground
path connecting the shielding of the cable to the Cable Receptacle.

APS25A77032G-3BT

Mfr. #:
Manufacturer:
Apacer
Description:
Solid State Drives - SSD SFD 25A SATA FLASH DRIVE SLC 32GB ST
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union