SPECIFICATION
RPT-65E
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
AC CURRENT (Typ.)
12V 5V -5V
4.5A 1.2A 0.5A
0.18 ~ 5.8A 0 ~ 1.5A 0 ~ 0.7A
Rated load Rated load
62.5W
Rated output power for convection; 80W with 18CFM min. forced air
120mVp-p 100mVp-p 120mVp-p
CH1:11.4 ~ 12.8V
±2.0%
±2.0%
±5.0% ±5.0%
±5.0% ±5.0%
±1.0% ±1.0% ±1.0%
800ms, 20ms at full load
20ms at full load
90 ~ 264VAC 127 ~370VDC
47 ~ 440Hz
77%
1.5A/115VAC 0.9A/230VAC
COLD START 25A/115VAC 50A/230VAC
<1mA
CH1:13.8 ~ 16.2V
90 ~ 125W output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
-20 ~ +60 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
±℃ ℃0.04%/ (0 ~ 50 ) on CH1 output
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
288.1K hrs min. MIL-HDBK-217F (25 )℃
PCB:127*76*29mm (L*W*H) ; with optional CASE:130*85*37mm (L*W*H)
PCB:0.24Kg; 63pcs/16Kg/1.35CUFT ; with optional CASE:0.47Kg;32pcs/16Kg/0.64CUFT
OVER VOLTAGE
SAFETY STANDARDS
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A, EAC TP TC 020
■ Features :
RPT-65 series
ENVIRONMENT
SAFETY &
EMC
(Note 5)
PROTECTION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage.
5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
OUTPUT POWER (max.)
UL60950-1, TUV EN60950-1 approved
, EAC TP TC 004
CH2 CH3 CH1 CH1CH2 CH3 CH2 CH3CH1
7.5A 7.5A 3.75APEAK LOAD Note.4
OUTPUT NUMBER
Universal AC input/Full range
12V or 24V high peak output current capability
Optional L-Bracket and cover (RPT-65x-C, x=E,F,G)
Low leakage current<1mA
Protections: Short circuit / Overload / Over voltage
65W free air convection, 80W with 18CFM forced air
100% full load burn-in test
Fixed switching frequency at 65KHz
2 years warranty
RPT-65F RPT-65G
12V 24V5V -12V 12V
4.5A 2.25A1.2A 0.5A 1.2A 0.5A
0.18 ~ 5.8A 0.09 ~ 2.9A0 ~ 1.5A 0 ~ 0.7A 0 ~ 1.5A 0 ~ 0.7A
Rated load Rated load Rated load Rated load
66W 66W
100mVp-p 150mVp-p 50mVp-p 100mVp-p150mVp-p 150mVp-p
CH1:11.4 ~ 12.8V CH1:22.8 ~ 26.4V
±5.0% ±5.0% ±5.0% ±5.0%
±5.0% ±5.0% ±5.0% ±5.0%
±2.0% ±2.0%
±2.0% ±2.0%
±1.0% ±1.0% ±1.0% ±1.0%±1.0% ±1.0%
77% 81%
CH1:13.8 ~ 16.2V CH1:27.6 ~ 32.4V
65W Triple Output Switching Power Supply
5V
EMC IMMUNITY
EMC EMISSION
File Name:RPT-65-SPEC 2018-01-12
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
