USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional <a class="productLink"
href="//www.tripplite.com/Remote-Control-Module-Tripp-Lite-PowerVerter-Inverters-Inverter-
Chargers~APSRM4">APSRM4</a> accessory when used in inverter mode. In AC uninterruptible power
mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC
power to connected loads.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 1020
PHYSICAL
Shipping Dimensions (hwd / in.) 12.50 x 11.00 x 10.75
Shipping Dimensions (hwd / cm) 31.75 x 27.94 x 27.30
Shipping Weight (lbs.) 26.00
Shipping Weight (kg) 11.79
Unit Dimensions (hwd / in.) 7 x 8.75 x 9
Unit Dimensions (hwd / cm) 17.78 x 22.23 x 22.86
Unit Weight (lbs.) 24
Unit Weight (kg) 10.89
Cooling Method Multi-speed fan
Material of Construction Polycarbonate
Form Factors Supported Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time
compatibility of loads for UPS applications)
Low Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,
182, 201V - see manual)
High Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272
CERTIFICATIONS
Approvals RoHS
WARRANTY
4 / 5
