THN 15WIR Series, 15 Watt
www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load 24 Vin models: 12 mA typ.
48 Vin models: 10 mA typ.
72 Vin models: 8 mA typ.
Surge voltage (1 s max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
72 Vin models: 185 V max.
Start-up voltage 24 Vin models: 9 VDC (or lower)
48 Vin models: 18 VDC (or lower)
72 Vin models: 38 VDC (or lower)
Start-up time 40 ms max.
Under voltage shut down 24 Vin models: 8 VDC typ.
48 Vin models: 16 VDC typ.
72 Vin models: 35 VDC typ.
Input filter Pi-type
Reflected input ripple current 30 mAp-p typ.
Electromagnetic compatibility (EMC), Emissions
– Conducted RI suppression on input EN 55011, EN 55032
class A (internal), class B (with external components)
Electromagnetic compatibility (EMC), Immunity
– Electrostatic discharge (ESD) EN 61000-4-2, ±8 kV/±6 kV, perf. criteria A
– Radiated RF field immunity EN 61000-4-3, 10 V/m, perf. criteria A
– Electrical fast transient / Surge immunity EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±2 kV, perf. criteria A
– with external components: 24 Vin models: capacitor 220µF /100 V and TVS (58V, 3kW)
48 Vin models: Nippon chemi-con KY capacitor 220µF /100 V
72 Vin models: capacitor 150µF /200 V and TVS (300V, 600W)
– Immunity to conducted RF disturbances EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8,
100 A/m continuous, perf. criteria A
1000 A/m 1s, perf. criteria A
Output Specifications
Voltage set accuracy ±1 % max.
Voltage adjustability (by connecting external resistor) 12, 15 VDC models: –10 % / +20 %
other models: ±10 %
Regulation – Input variation single output: 0.2 % max.
dual output: 0.5 % max.
– Load variation 0 – 100 % single output: 0.2 % max.
dual output 1 % max.
– cross regulation (asymmetrical load 25%/100 %) 5 % max.
Minimum load not required
Ripple and noise –Single output 3.3 & 5.0 VDC models: 75 mVp-p typ. (with 10 µF / 6.3 V X7R MLCC)
(20 MHz Bandwidth) 12 & 15 VDC models: 100 mVp-p typ. (with 1 µF / 25 V X7R MLCC)
24 VDC model: 125 mVp-p typ. (with 2.2 µF / 50 V X7R MLCC)
–Dual output 5 VDC model: 75 mVp-p typ. (each 10 µF / 6.3 V X7R MLCC)
12 & 15 VDC models: 100 mVp-p typ. (each 1 µF / 25 V X7R MLCC)
24 VDC model: 125 mVp-p typ. (each 2.2 µF / 50 V X7R MLCC)
Transient Response (25% load step change)
– Recovery time 250 µs typ.