(1/3)
002-04 / 20090402 / e511_mlf1005.fm
• All specifications are subject to change without notice.
SMD Inductors(Coils)
For Signal Line(Multilayer, Magnetic Shielded)
MLF Series MLF1005
Various kinds of digital equipment are becoming smaller with more
advanced functions. Therefore, parts used in such digital
equipment need to be small and thinner.
MLFI005 Series inductors were developed to meet these
demands. This series of inductors have 75% less mass than
conventional MLF1608 inductors and are magnetically sealed just
like conventional inductors, making high-density mounting
possible.
FEATURES
• 75% less mass than the MLF1608 series.
• Magnetically sealed configuration allowing for high-density
mounting.
• Does not contain lead and is compatible with lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
Signal processing modules such as mobile phones and tuners
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions L× W
(3) Material code
(4) Inductance value
(5) Inductance tolerance
(6) Packaging style
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the tempera-
ture difference between the solder temperature and product
temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• The inductance value may change due to magnetic saturation if
the current exceeds the rated maximum.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed cir-
cuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
Operating temperature range –40 to +85°C
Storage temperature range –40 to +85°C
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLF 1005 DR10 K T
(1) (2) (3) (4) (5)
1005 1.0× 0.5× 0.5
R10 0.1µH
1R0 1.0µH
K ±10%
T Taping [reel]
Packaging style Quantity
Taping 10000 pieces/reel
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
