MC10E107, MC100E107
http://onsemi.com
4
Table 6. 100E SERIES PECL DC CHARACTERISTICS V
CCx
= 5.0 V; V
EE
= 0.0 V (Note 5)
Symbol Characteristic
−40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
I
EE
Power Supply Current 42 50 42 50 48 58 mA
V
OH
Output HIGH Voltage (Note 6) 3975 4050 4120 3975 4050 4120 3975 4050 4120 mV
V
OL
Output LOW Voltage (Note 6) 3190 3295 3380 3190 3255 3380 3190 3260 3380 mV
V
IH
Input HIGH Voltage 3835 3975 4120 3835 3975 4120 3835 3975 4120 mV
V
IL
Input LOW Voltage 3190 3355 3525 3190 3355 3525 3190 3355 3525 mV
I
IH
Input HIGH Current 200 200 200
mA
I
IL
Input LOW Current 0.5 0.3 0.5 0.25 0.5 0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with V
CC
. V
EE
can vary −0.46 V / +0.8 V.
6. Outputs are terminated through a 50 W resistor to V
CC
− 2.0 V.
Table 7. 100E SERIES NECL DC CHARACTERISTICS V
CCx
= 0 V; V
EE
= −5.0 V (Note 7)
Symbol Characteristic
−40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
I
EE
Power Supply Current 42 50 42 50 48 58 mA
V
OH
Output HIGH Voltage (Note 8) −1025 −950 −880 −1025 −950 −880 −1025 −950 −880 mV
V
OL
Output LOW Voltage (Note 8) −1810 −1705 −1620 −1810 −1745 −1620 −1810 −1740 −1620 mV
V
IH
Input HIGH Voltage −1165 −1025 −880 −1165 −1025 −880 −1165 −1025 −880 mV
V
IL
Input LOW Voltage −1810 −1645 −1475 −1810 −1645 −1475 −1810 −1645 −1475 mV
I
IH
Input HIGH Current 200 200 200
mA
I
IL
Input LOW Current 0.5 0.3 0.5 0.25 0.5 0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Input and output parameters vary 1:1 with V
CC
. V
EE
can vary −0.46 V / +0.8 V.
8. Outputs are terminated through a 50 W resistor to V
CC
− 2.0 V.