(Preliminary)PL123E-05
Low Skew Zero Delay Buffer
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1(408) 944 -0800 • fax +1(408) 474-1000 • www.micrel.com Rev 12/13/11 Pa ge 7
3.3V and 2.5V AC Electrical Specifications (continued)
Period Jitter,
Peak
[8,9 ]
3.3V, >66 MHz, <30 pF, Standard Drive
3.3V, >66 MHz, <30 pF, High Drive
2.5V, >66 MHz, <15 pF, Standard. Drive
2.5V, 66–100 MHz, <15 pF, High Drive
2.5V, >100 MHz, <15 pF, High Drive
Notes:
7. For the given maximum loading conditions. See C
L
in Operating Conditions Table.
8. Parameter is guaranteed by design and characterization. Not 100% tested in production.
9. Typical jitter is measured at 3.3V or 2.5V, 29°C, with all outputs driven into the maximum specified load.