Inner Panels Ventilation
Door Clamping Hardware Filtered Fans
Heaters Type 1 Louvered Ventilating Plates
Terminal Kit Assemblies Temperature Controls
Swing Panel Kit Ground Wire Kits
Type 4 Mild Steel Junction Box
1414 N4 Series
Lift-Off Cover with Clamps
Application
Designed for use as instrument enclosures, electric, hydraulic or pneumatic
control housings, electrical junction boxes or terminal wiring enclosures.
Provides protection where equipment may be hosed down or otherwise be
very wet, or in outdoor applications for full weather protection.
Standards
UL 508 Type 3R, 4, 12 and 13
CSA Type 3R, 4, 12 and 13
Complies with
NEMA Type 3R, 4, and 12
JIC EGP-1-1967
IEC 60529, IP66
Construction
Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge
steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Welded brackets provide for enclosure mounting.
Lift off cover is secured with stainless steel clamps and screws.
Seamless poured-in place gasket.
All models larger than 4" x 4" include a removable 14 gauge inner panel.
Internal threaded weld studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided on
the enclosure.
Finish
Cover and enclosure are phosphatized, finished in recoatable smooth ANSI
61 gray powder coating.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.
