Quick Start Guide for i.MX28 EVK
J78 connector
for LCD. i.MX28
EVK board shown
without LCD
Connect RS232 Cable
ConnecttheRS232cabletothe
debugUARTport(optional).
Serialportconfiguration:115.2kbaud,
8databits,1stopbit,noparity.
Connect Power Supply
Connect the 5V power supply
cabletothe5VDCpowerjack(J84).
Power On
PressthePOWERbutton(S5).
Setting Up the Board
Check Jumpers
Ensurethejumpersandswitches
are in their default positions by comparing
themtothejumperandswitchsettings
tableinthisQuickStartGuide.
Insert SD Card
InserttheappropriateWindows
EmbeddedCEorLinuxSDcardinto
SDcardsocket0(onthebottomside
of the board).
Connect Ethernet Cable
Connect the Ethernet cable to
thelowerportoftheEthernetjack.
STEP
1
STEP
4
STEP
2
STEP
5
STEP
6
STEP
3
Quick Start Guide for i.MX28 EVK
For WinCE:
1.Duringthebootprocess,therewillbe
operating system status information
scrolling on the terminal window of
the PC and the Freescale logo will
beshownonthe4.3”WVGAdisplay
daughtercard.
2. After the boot process completes,
calibrate the touch screen by pressing
the cross-hair targets.
3.TheWindowsCEGUIwillbenowbe
displayed.
4.ConnecttotheInternetviaInternet
Exploreroryourdefaultbrowser.
For Linux:
1.Duringthebootprocess,therewillbe
operating system status information
scrolling on the terminal window of the
PC and a penguin image in the upper
leftcornerofthe4.3”WVGAdisplay
daughter card.
2. After the boot process completes,
the Freescale login prompt will be
displayed on the terminal window and
theLinuxGUIwillbeshownonthe
4.3”WVGAdisplaydaughtercard.

MCIMX28EVK

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
Development Boards & Kits - ARM MX28 PLATFORM DEV KIT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet