OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MCU0805MD1001DP500

P1-P3P4-P6P7-P9P10-P12
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional
www.vishay.com
Vishay Beyschlag
Revision: 01-Mar-17
7
Document Number: 28760
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FUNCTIONAL PERFORMANCE
Pulse load rating in accordance with EN 60115-1 clause 4.27; 1.2 μs/50 μs; 5 pulses at 12 s interval;
for permissible resistance change ± (0.5 % R + 0.05 )
1.2/50 Pulse
Pulse load rating in accordance with EN 60115-1 clause 4.27; 10 μs/700 μs;
10 pulses at 1 min intervals; for permissible resistance change ± (0.5 % R + 0.05 )
10/700 Pulse
In accordance with IEC 60195
Current Noise Voltage Ratio
100 V
1 kV
10 V
10 kV
Resistance Value
Test Voltage
100 Ω 1 kΩ 10 kΩ 100 kΩ
10 Ω
1 MΩ
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
R
100 V
1 kV
10 V
10 kV
Resistance Value
Test Voltage
100 Ω 1 kΩ 10 kΩ 100 kΩ
10 Ω
1 MΩ
R
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
Resistance Value
Current Noise Voltage Ratio
0.01
1 M
Ω
0.1
1
µV/V
R
3
100 k
Ω
10 k
Ω
1 k
Ω
1
Ω
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
100
Ω
10
Ω
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional
www.vishay.com
Vishay Beyschlag
Revision: 01-Mar-17
8
Document Number: 28760
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FUNCTIONAL PERFORMANCE
|Z|/R for 49.9 chip resistor
RF-Behavior
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, generic specification
EN 60115-8 (successor of EN 140400), sectional
specification
EN 140401-801, detail specification
IEC 60068-2-xx, test methods
The components are approved under the IECQ-CECC
quality assessment system for electronic components.
The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-801. The table presents only
the most important tests, for the full test schedule refer to
the documents listed above. However, some additional
tests and a number of improvements against those
minimum requirements have been included.
The testing also covers most of the requirements specified
by EIA/ECA-703 and JIS-C-5201-1.
The tests are carried out under standard atmospheric
conditions in accordance with IEC 60068-1, 4.3, whereupon
the following values are applied:
Temperature: 15 °C to 35 °C
Relative humidity: 25 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)
A climatic category LCT / UCT / 56 is applied, defined by the
lower category temperature (LCT), the upper category
temperature (UCT), and the duration of exposure in the
damp heat, steady state test (56 days).
The components are mounted for testing on printed circuit
boards in accordance with EN 60115-8, 2.4.2, unless
otherwise specified.
0.1
0.3
1 GHz
20
0.5
1.0
1.5
2.0
| |/
f
310
MC T 060 3 AT
M CU 0805 AT
Frequency
R
Z
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional
www.vishay.com
Vishay Beyschlag
Revision: 01-Mar-17
9
Document Number: 28760
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
CLAUSE
IEC 60068-2
(1)
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE (R)
STABILITY CLASS 0.5 OR BETTER
Stability for product types:
MCS 0402 AT 2.43 to 221 k
MCT 0603 AT 1 to 511 k
MCU 0805 AT 1 to 1 M
MCA 1206 AT 1 to 1 M
4.5 - Resistance ± 1 % R; ± 0.5 % R
4.8 -
Temperature
coefficient
At (20/-55/20) °C and
(20/155/20) °C
± 50 ppm/K; ± 25 ppm/K
4.25.1 -
Endurance at 70 °C:
standard operation mode
U = or U = U
max.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
70 °C; 1000 h
70 °C; 8000 h
± (0.15 % R + 0.05 )
± (0.25 % R + 0.05 )
Endurance at 70 °C:
power operation mode
U = or U = U
max.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
70 °C; 1000 h
70 °C; 8000 h
± (0.3 % R + 0.05 )
± (0.5 % R + 0.05 )
Endurance at 85 °C:
advanced temperature
operation mode
U = or U = U
max.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
85 °C; 1000 h ± (0.5 % R + 0.05 )
4.25.3 -
Endurance at
upper category
temperature
125 °C; 1000 h
155 °C; 1000 h
175 °C; 1000 h
± (0.15 % R + 0.05 )
± (0.3 % R + 0.05 )
± (0.5 % R + 0.05 )
4.24 78 (Cab)
Damp heat,
steady state
(40 ± 2) °C; 56 days;
(93 ± 3) % RH
± (0.1 % R + 0.05 )
4.37 67 (Cy)
Damp heat,
steady state,
accelerated
Standard operation mode
(85 ± 2) °C
(85 ± 5) % RH
U = ;
U 0.3 x U
max.
; 1000 h
± (0.5 % R + 0.05 )
4.23
Climatic sequence:
standard operation mode
± (0.5 % R + 0.05 )
4.23.2 2 (Bb) dry heat 155 °C; 16 h
4.23.3 30 (Db) damp heat, cyclic
55 °C; 24 h; 90 % RH;
1 cycle
4.23.4 1 (Ab) cold -55 °C; 2 h
4.23.5 13 (M) low air pressure 8.5 kPa; 2 h; (25 ± 10) °C
4.23.6 30 (Db) damp heat, cyclic
55 °C; 24 h; 90 % RH;
5 cycles
4.23.7 - DC load U = U
max.
; 1 min
-1 (Aa)
Storage at low
temperature
-55 °C; 2 h ± (0.1 % R + 0.01 )
4.19 14 (Na)
Rapid change of
temperature
30 min at -55 °C and
30 min at 155 °C;
1000 cycles
± (0.25 % R + 0.05 )
Extended rapid change
of temperature
30 min at -40 °C;
30 min at 125 °C
(2)
;
MCS 0402 AT: 3000 cycles
MCT 0603 AT: 2000 cycles
MCU 0805 AT: 1500 cycles
MCA 1206 AT: 1000 cycles
± (0.25 % R + 0.05 );
( 50 % of initial shear force)
4.13 -
Short time overload;
standard operation mode
U = 2.5 x or
U = 2 × U
max.
;
whichever is the less severe;
5 s
± (0.1 % R + 0.01 )
Short time overload;
power operation mode
± (0.25 % R + 0.05 )
P
85
x R
0.1 x P
70
x R
P
70
x R
P
70
x R
P1-P3P4-P6P7-P9P10-P12

MCU0805MD1001DP500

Mfr. #:
Buy MCU0805MD1001DP500
Manufacturer:
Vishay
Description:
Thin Film Resistors - SMD .2W 1Kohms .5% 0805 25ppm Auto
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet