OP282/OP482 Data Sheet
Rev. I | Page 4 of 16
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Supply Voltage ±18 V
Differential Input Voltage
1
36 V
Output Short-Circuit Duration Indefinite
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −40°C to +85°C
Junction Temperature Range −65°C to +150°C
Lead Temperature (Soldering 60 sec)
1
For supply voltages less than ±18 V, the absolute maximum input voltage is
equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device in
socket for PDIP. θ
JA
is specified for a device soldered in the circuit
board for SOIC_N, MSOP, and WLCSP packages. This was
measured using a standard 4-layer board.
Table 3.
Package Type θ
JA
θ
JC
Unit
8-Lead MSOP [RM] 142 45 °C/W
8-Lead SOIC_N (S-Suffix) [R] 120 45 °C/W
14-Lead PDIP (P-Suffix) [N] 83 39 °C/W
14-Lead SOIC_N (S-Suffix) [R] 112 35 °C/W
14-Ball WLCSP [CB]
1, 2
70 16 °C/W
1
Simulated thermal numbers per JESD51-9.
2
Junction-to-board thermal resistance.
ESD CAUTION