X42A-C-001-01 1
Revision 1.01
LCD Controller
S1D13700
August 2007
S1D13700 Embedded Memory Graphics LCD Controller
The S1D13700 Embedded Memory Graphics LCD Controller can display both text and graphics on an LCD panel.
The S1D13700 allows layered text and graphics, scrolling of the display in any direction, and partitioning of the
display into multiple screens. It includes 32K bytes of embedded SRAM display memory which is used to store
text, character codes, and bit-mapped graphics. The S1D13700 handles display controller functions including:
transferring data from the controlling microprocessor to the buffer memory, reading memory data, converting data
to display pixels, and generating timing signals for the LCD panel.
The S1D13700 is designed with an internal character generator which supports 160, 5x7 pixel characters in
internal mask ROM (CGROM) and 64, 8x8 pixel characters in character generator RAM (CGRAM). When the
CGROM is not used, up to 256, 8x16 pixel characters are supported in CGRAM.
Designed as a functional replacement to the S1D13305, the S1D13700 has an expanded feature set which
includes; direct support of the Motorola MC68K microprocessor family, embedded display buffer, increased clock
speeds, increased grayscale depths, lower power technology and smaller packages.
■ FEATURES
CPU Interface
• 8-bit CPU data bus interface
• Direct Address Bus support for:
Generic (Z80/8080 family) bus interface
Motorola MC68K family bus interface
• Indirect Address Bus support for:
Generic (Z80/8080 family) bus interface
Motorola MC68K family bus interface
Motorola M6800 family bus interface
Memory Interface
• Embedded 32K byte SRAM display buffer
Display Support
• 4-bit monochrome LCD interface
• Programmable Display Resolutions:
Typical resolutions include:
640x240 at 1 bpp
320x240 at 2 bpp
240x160 at 4 bpp
• 1/2-duty to 1/256-duty LCD drive
Character Generation
• 160, 5x7 pixel characters in embedded mask-
programmed character generator ROM
• Up to 256, 8x16 pixel characters in embedded
character generator RAM
Display Modes
• Gray Shade Support for:
1/2/4 bit-per-pixel (up to 16 gray shades)
• Text, graphics, and combined text/graphics display
modes
• Three overlapping screens in graphics mode
• Programmable cursor control (Hardware Cursor)
• Smooth horizontal and vertical scrolling of all or part of
the display
Power
• Software initiated Power Save Mode
• Low power consumption
• Flexible Power Supply configuration:
CORE V
DD
3.0 to 3.6 volts.
NIO V
DD
3.0 to 5.5 volts (LCD interface).
HIO V
DD
3.0 to 5.5 volts (CPU interface).
Clock Source
• Two terminal crystal or Single Oscillator input
Input clock maximum of 60MHz
Package
• TQFP13-64pin