9164-4500PL

3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Polarized Boardmount Socket
.100 × .100 Centerbump Polarization with Straight Solder Tails 9100 Series
Physical
Electrical
Environmental
Insulation
Material:
Glass Filled Polyester (PBT)
Flammability:
UL 94V-0
Color:
Gray
Contact
Material:
Copper Alloy
Plating
Underplating:
2 μm [ 79 μ″ ] Nickel
Wiping Area:
0.3 μm [ 12 μ″ ] Gold
Solder Tails:
Gold flash
Marking:
3M Logo, Part Identification Number and Orientation Triangle
Current Rating:
1 A
Insulation Resistance:
> 1 × 10
9
Ω
at 500 V
DC
Withstanding Voltage:
1000 V
RMS
at Sea Level
Temperature Rating:
-55°C to +105°C
Process Rating:
Maximum insulator temperature 191°C (Solder Wave Process Only)
Standard centerbump with straight solder tails
Mates with low profile shrouded headers
Part number on each piece
Optional keying plug
20-64 contacts
Military Dual polarization
Board retention feature
See regulatory information appendix (RIA) for
chemical compliance information
TS-0690-B
Sheet 1 of 2
Date Modified: September 27, 2007
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Polarized Boardmount Socket
.100 × .100 Centerbump Polarization with Straight Solder Tails 9100 Series
Contact
Quantity
Dimension A
20 29.9 [ 1.18 ]
26 37.5 [ 1.48 ]
34 47.7 [ 1.88 ]
40 55.3 [ 2.18 ]
50 68.1 [ 2.68 ]
60 80.7 [ 3.18 ]
64 85.8 [ 3.38 ]
TS-0690-B
Sheet 2 of 2
mm
[Inch]
mm
Tolerance Unless Noted
[ ] Dimensions for
Reference only
± .15 ± .3
.000.00
.0
Ordering Information
Contact Quantity:
See Table
Sockets
91XX - 4500PL
Notes:
1. The contact soldertail is designed to retain the connector on the PC board during flow soldering operations.
2. Recommended to be mated to the 2.54 [.100] × 2.54 [.100] low profile header and the 4600 series plug connector without ejector latches.
.90 Typ
[ .035 ]
2.54
[ .100 ]
Recommended Mounting Hole Pattern
(Shown for Top Side of PC Board)
2.54
[ .100 ]
3435-0
Keying Plug
(Optional: Order Separately)
0.66
[ .026 ]
1.30
[ .051 ]
0.81
[ .032 ]
6.1
[ .24 ]
3435
Breakaway
Tab
2.54 Ref
[ .100 ]
0.32
[ .013 ]
0.57
[ .022 ]
2.8
[ .11]
9.0
[ .354 ]
91XX
0.45
[ .018 ]
Triangle
Indicates
Position 1
0.70
[ .028 ]
See Note 1
2.54 Ref
[ .100 ]
3.4
[ .13 ]
Military:
Dual Polarization
Slots
Position 1
2.54
[ .100 ]
3.6
[ .14 ]
A
Position 2
2.54 Typ
[ .100 ]
1.0
[ .04 ]
Centerbump (Standard)
6.1
[ .24 ]
(RIA E1 & C1 apply)
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-b

9164-4500PL

Mfr. #:
Manufacturer:
3M
Description:
Headers & Wire Housings POLARIZED BDMNT SCKT 64 PIN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union