AEDM-5810-T06

AEDM-5xxx
Quick Assembly High Resolution
Three Channel Optical Encoders
Data Sheet
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Description
Avago Technologies' AEDM-5xxx series encoders are high
resolution and high performance three channel optical
incremental encoders. These encoders emphasize on high
reliability, high resolution, and easy assembly.
Each encoder contains a LED source with lens, an ASIC
with integrated photo detector arrays, LED current regula-
tion, interpolator and output driver circuitry, and a code
wheel which rotates between the emitter and detector
ASIC. The outputs of the AEDM-5xxx are two square waves
in quadrature. In addition, a third channel oers index
signal, which is a 90 electrical degree, true index pulse
which is generated once for each full rotation of the code
wheel. The AEDM-5xxx series utilizes a lm code wheel al-
lowing for resolutions up to 5000 CPR.
These bearing-less housed encoders may be quickly and
easily mounted to a motor. For larger diameter motors, the
AEDM-59xx series feature external mounting ears option.
The quadrature signals and the index pulse are accessed
through ve 0.025 inch square pins located on 0.1 inch
centers.
Standard resolutions between 2000 and 5000 counts per
revolution are presently available. Consult local Avago
sales representatives for other resolutions.
Features
Two channel quadrature output with index pulse
High Resolution - up to 5000 CPR
Operating temperature – 40°C to +85°C
Quick and easy assembly
No signal adjustment required
Cost Eective solution
Small size
TTL compatible output
Single 5V supply with ±10% tolerance
External mounting ears option available for larger
motors.
Note: Avago Technologies encoders are not recommend-
ed for use in safety critical applications such as. ABS brak-
ing systems, power steering, life support systems and
critical care medical equipment. Please contact our sales
representative if clarications are needed.
2
Package dimensions
AEDM-58xx
AEDM-59xx
NOTES:
1. LEAVE CLEARANCE FOR TURNING AND REMOVING THE HEX WRENCH.
2. TYPICAL DIMENSIONS IN MILLIMETERS (INCHES).
*Note: For the AEDM-58XX Pin #2 is CH. I, the index output.
NOTES:
1. LEAVE CLEARANCE FOR TURNING AND REMOVING THE HEX WRENCH.
2. TYPICAL DIMENSIONS IN MILLIMETERS (INCHES).
*Note: For the AEDM-59XX Pin #2 is CH. I, the index output.
3
Absolute Maximum Ratings
Parameter Symbol Minimum Maximum Units
Storage Temperature T
s
-40 +85 °C
Operating Temperature T
A
-40 +85 °C
Supply Voltage V
CC
-0.5 7 V
Output Voltage V
O
-0.5 Vcc V
Output Current per Channel I
OUT
±5 mA
Velocity 12,000** RPM
Note **: Velocity 12000 RPM applies to Encoder Resolution of 5000 CPR
Recommended Operating Conditions
Parameter Symbol Min. Typ. Max. Units Notes
Temperature T
A
-40 +85 °C
Supply Voltage V
CC
4.5 5.0 5.5 Volt Ripple < 100 mVp-p
Load Capacitance C
L
100 pF
Output Frequency f 500 kHz 2000 – 2500 CPR
1,000 kHz 4000 – 5000 CPR
Shaft Perpendicularity
Plus Axial Displacement
± 0.15
(± 0.006)
mm
(in.)
Spatial play
(including shaft eccentricity)
Ø0.40
(0.016)
mm
(in.)
Encoding Characteristics
Encoding characteristics are applicable per the Recommended Operating Conditions, unless otherwise specied. Values
are for the worst case error over the full rotation.
Encoder Resolution 4000 CPR
Parameter Symbol Min Typ.* Max Units
Pulse Width Error
DP
21 45 °e
Logic State Width Error
DS
17 45 °e
Phase Error
Df
12 25 °e
Cycle Error
DC
36 60 °e
Index Pulse Width P
0
65 90 115 °e
Encoder Resolution 2500 CPR
Parameter Symbol Min Typ.* Max Units
Pulse Width Error
DP
20 30 °e
Logic State Width Error
DS
15 25 °e
Phase Error
Df
10 15 °e
Cycle Error
DC
17 30 °e
Index Pulse Width P
0
72 90 108 °e
* Typical values specied at V
CC
= 5.0V and 25ºC and for single ended, unless otherwise stated

AEDM-5810-T06

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Encoders Kit En,F CW,3Ch 2000CPR,1/4in
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union