Table 13: TCG/Opal Support Parameters (Continued)
Property Supported? Comments
ACK/NACK Support Not Supported Session reliability
Async Support Not Supported Asynchronous protocol support with multiple com-
mands per session
Geometry Reporting Feature
ALIGN Supported OPAL 2.0 (only)
Logical Block Size 512 bytes Logical block size = 512 Bytes
Alignment Granularity 4096 Bytes Page or Descriptor size <<Minimum AES LU size>>
Lowest Aligned LBA 0
OPAL SSC V2.00 Feature Descriptor
Base COM ID 0x1000 0x1000-0xFFFF defined for COM ID management
Number of COM IDs 1
Range Crossing Behavior 0 If drive receives a READ or WRITE command that
spans multiple LBA ranges and the LBA ranges are
not locked, then:
1. Process the data transfer, if Range Crossing = 0
2. Terminate the command with “Other Invalid
Command Parameter” if Range Crossing = 1
Number of Locking SP Admin Authorities
Supported
4 As per OPAL 2.0, drive should support at least 4 ad-
min
Number of Locking SP User Authorities
Supported
16 As per OPAL 2.0, drive should support at least 8
users
Initial C_PIN_SID PIN Indicator 0x00 0x00 = The initial C_PIN_SID PIN value is equal to
the C_PIN_MSID PIN value
0xFF = The initial C_PIN_SID PIN value is VU, and
MAY not be equal to the C_PIN_MSID PIN value
OPAL 2.0 (only)
Customer-specific SID – Configurable
Behavior of C_PIN_SID PIN upon Ter Revert 0x00 0x00 = The C_PIN_SID PIN value becomes the value
of the C_PIN_MSID PIN column after successful in-
vocation of revert on the admin SP’s object in the
SP table
0xFF = The C_PIN_SID PIN value changes to a VU
value after successful invocation of revert on the
admin SP’s object in the SP table and MAY not be
equal to the C_PIN_MSID PIN value OPAL 2.0 (only)
DataStore Table Feature
Maximum number of DataStore Tables 16 The maximum number of the DataStore tables that
the TPer supports, including the DataStore table
defined in OPAL SSC 2.0
Maximum total size of DataStore Tables 90MB Specifies the maximum total size in bytes of all of
the DataStore tables that TPer supports, including
the DataStore table defined in OPAL SSC 2.0
MBR Table 128MB
M500IT 2.5-Inch NAND Flash MLC SSD
TCG/Opal Support
09005aef864ead5e
m500it_2_5_MLC_industrial_ssd.pdf - Rev. G 6/16 EN
13
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Table 13: TCG/Opal Support Parameters (Continued)
Property Supported? Comments
Byte Table Access Granularity
Mandatory Write Granularity 1 TPer enforces when the host invokes the set meth-
od on byte tables; it should be less than or equal to
8192; it should be less than or equal to Recommen-
ded Access Granularity, OPAL 2.0 (only)
Recommended Access Granularity 8192 Tper recommends when the host invokes the set or
get method on byte tables; it should be less than or
equal to 8192
Cryptographic Features
AES Key Size 256 Bits AES key is generated by using CTR DRBG algorithm
(FIPS Compliant)
AES Mode CBC IV swapped
Number of Ranges/Band Supported 16
(15 user definable,
1 global range)
Now supporting 15 LBA ranges; range cross read
and write allowed if LBA ranges are unlocked
Re-Encryption Not Supported
Key Management Cryptographic
Crypto Erase Completion Time <1s Yes
Cryptographic Algorithms are Certified by
FIPS-197
No Designed to meet, no plans for certification
AES 256-Bit CBC/ECB Mode Supported ECB mode used only for generating the random
key by CTR DRBG
CTR DRBG Supported
SHA 256 Supported
RSA 2048 Signature Verification Supported
TPer Communication Properties
Max ComPacket Size 131072 256 sectors (128K)
Max Response ComPacket Size 131072 256 sectors (128K)
Max Packet Size 128512
Max Individual Token Size 123904
Max Packets 1
Max SubPackets 1
Max Sessions 1 Each session requires a set of buffers and variables
Max Transaction Limit 1 Transaction are inside sessions
Max Methods 1 Methods are contained in a transaction
Max Authentications 14
Def Session Timeout Yes The session timeout length (in milliseconds) used
by the TPer by default
IEEE1667
Probe Silo Supported
M500IT 2.5-Inch NAND Flash MLC SSD
TCG/Opal Support
09005aef864ead5e
m500it_2_5_MLC_industrial_ssd.pdf - Rev. G 6/16 EN
14
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Table 13: TCG/Opal Support Parameters (Continued)
Property Supported? Comments
TCG Storage Silo Supported
Other than Probe and TCG Storage Silo Not Supported
IEEE1667 Major Version TBD As per current draft specification, major and minor
versions are not yet decided
IEEE1667 Minor Version TBD
Maximum P_OUT Transfer Size 131072 256 sectors (128K)
Others
FDE (ATA Security with Key Management) Yes
Secure Firmware Download Supported Firmware image is validated by using SHA256 and
RSA2048 algorithm
M500IT 2.5-Inch NAND Flash MLC SSD
TCG/Opal Support
09005aef864ead5e
m500it_2_5_MLC_industrial_ssd.pdf - Rev. G 6/16 EN
15
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.

MTFDDAK120MBD-2AK12ITYY

Mfr. #:
Manufacturer:
Micron
Description:
SSD 120GB 2.5" MLC SATA III 3.3V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union