Table 14: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
84 Command set/feature supported extension
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13 F 1b 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported
12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)
11 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)
10–9 X 00b Obsolete
8 F 1b 1 = 64-bit word wide name supported
7 X 0b 1 = WRITE DMA QUEUED FUA EXT command supported
6 F 1b 1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT
commands supported
5 F 1b 1 = General Purpose Logging feature set supported
4 F 0b 1 = Streaming feature set supported
3 X 0b 1 = Media Card Pass Through Command feature set suppor-
ted
2 F 0b 1 = Media serial number supported
1 F 1b 1 = SMART self-test supported
0 F 1b 1 = SMART error logging supported
85 Command set/feature enabled.
15 X 0b Obsolete
14 F 1b 1 = NOP command supported
13 F 1b 1 = READ BUFFER command supported
12 F 1b 1 = WRITE BUFFER command supported
11 X 0b Obsolete
10 V 1b 1 = Host Protected Area feature set enabled
9 F 0b 1 = DEVICE RESET command supported
8 V 0b 1 = SERVICE interrupt enabled
7 V 0b 1 = Release interrupt enabled
6 V 1b 1 = Look-ahead enabled
5 V 1b 1 = Write cache enabled
4 F 0b Shall be cleared to zero to indicate that the PACKET feature
set is not supported.
3 F 1b Power Management feature set is enabled
2 X 0b Obsolete
1 V 0b 1 = Security Mode feature set enabled
0 V 1b 1 = SMART feature set enabled
M500IT 2.5-Inch NAND Flash MLC SSD
Device ID
09005aef864ead5e
m500it_2_5_MLC_industrial_ssd.pdf - Rev. G 6/16 EN
23
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.