OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MTFDDAT032MAM-1J1

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30
C400v mSATA NAND Flash SSD
MTFDDAT032MAM, MTFDDAT064MAM
Features
• Micron
®
25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Performance
1, 2
– Sequential 128k READ: up to 500 MB/s
– Sequential 128k WRITE: up to 95 MB/s
– Random 4k READ: up to 45,000 IOPS
– Random 4k WRITE: up to 20,000 IOPS
– PCMark
®
Vantage (HDD test suite score): up to
65,000
– READ/WRITE latency: 55µs (TYP)
• Reliability
– MTTF: 1.2 million device hours
3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 10
15
bits read
• Low power consumption
– <150mW TYP
4
• Endurance: Total bytes written (TBW) – 36TB
• Capacity
5
(unformatted): 32GB, 64GB
• Mechanical – 5mm height
– mSATA connector: 3.3V ±5%
– Caseless design: 50.80mm x 29.85mm x 3.75mm
– Weight: 10g (MAX)
• Field-updateable firmware
• Operating temperature
– Commercial (0°C to +70°C)
6
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache enabled.
2. 4K transfers used for READ/WRITE latency
values.
3. The product achieves a mean time between
failure (MTTF) based on population statis-
tics not relevant to individual units.
4. Active power measured during execution of
MobileMark
®
2007 with DIPM (device-initi-
ated power management) enabled.
5. 1GB = 1 billion bytes; formatted capacity is
less.
6. Drive case temperature.
C400v mSATA NAND Flash SSD
Features
PDF: 09005aef8485be28
realssd_c400v_msata.pdf - Rev. E 8/12 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Part Numbering Information
Micron’s RealSSD™ C400 SSD is available in different configurations and densities. Visit www.micron.com for a
list of valid part numbers.
Figure 1: Part Number Chart
MT FD D AT 032 M AM - 1 J x ES
Micron Technology
Product Family
FD = Flash drive
Drive Interface
D = SATA 6.0 Gb/s
Drive Form Factor
AT = mSATA
Drive Density
032 = 32GB
064 = 64GB
NAND Flash Type
M = MLC
Product Family
AM = C400
Sector Size
1 = 512-byte
Production Status
Blank = Production
ES = Engineering sample
Operating Temperature Range
Blank = Commercial (0°C to +70°C)
Hardware Feature Set
Blank = Null
AA = Contact factory
AB = Contact factory
AC = Contact factory
Firmware Feature Set
Blank = Null
1 = Contact factory
2 = Contact factory
BOM Revision
For example:
1 = 1st generation
NAND Flash Component
J = 32Gb, MLC, x8, 3.3V (25nm)
x xx
Warranty: Micron makes no warranties, expressed or implied, including, but not limited to, any implied warranties of merchantability, fitness for a par-
ticular purpose, other warranties that might arise from course of dealing or custom of trade other than that micron warrants only that the product com-
plies with Micron's specification sheet for the product at the time of delivery, provided that deviations from specifications which do not materially affect
performance of such product in the system and configuration in or for which it is initially installed or qualified by customer shall not be deemed to
constitute failure to comply with such specifications. Any claim against Micron must be made within three (3) years from the date of shipment by Micron
and Micron has no liability thereafter. Micron's liability is limited to repair or replacement of the defective product or credit or refund of the purchase
price of the defective product, provided that Micron may elect refund in lieu of credit, replacement or repair.
C400v mSATA NAND Flash SSD
Features
PDF: 09005aef8485be28
realssd_c400v_msata.pdf - Rev. E 8/12 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
General Description
Micron’s RealSSD solid state drive (SSD) uses a single-chip controller with a SATA inter-
face on the system side and n-channels of Micron NAND Flash internally. Packaged in
an JEDEC-standard mSATA form factor, the SSD integrates easily in existing storage in-
frastructures.
The SSD is designed to use the SATA interface efficiently during both READs and
WRITEs while delivering bandwidth-focused performance. SSD technology enables en-
hanced boot times, faster application load times, reduced power consumption, and ex-
tended reliability.
Figure 2: Functional Block Diagram
NAND
SATA
NAND
NAND
NAND
SSD
controller
DRAM
buffer
NAND
C400v mSATA NAND Flash SSD
General Description
PDF: 09005aef8485be28
realssd_c400v_msata.pdf - Rev. E 8/12 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30

MTFDDAT032MAM-1J1

Mfr. #:
Buy MTFDDAT032MAM-1J1
Manufacturer:
Micron
Description:
SSD 32GB MSATA MLC SATA III 3.3V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet