DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DO NOT
SCALE FROM
THIS PRINT
MCPK-8-X
SIZE
END
(SEE NOTE 7)
-T: TERMINAL
-S: SOCKET
PLUG KIT
15.50 .610
REF
01
03
08
04
07
10
11
12
12 POSITION
-T: TERMINAL
ALIGNMENT ARROW
15.00 .591
REF
03
01
10
07
04
08
12
11
12 POSITION
-S: SOCKET
ALIGNMENT ARROW
SUB-MCR-8-12
CG-30-8
CC-30-8
CN-30-8
SPC-30-8
FIG 2
MCPK-8-T SHOWN
SUB-MCP-8-12
CR-30-8
SPR-30-8
CG-30-8
CC-30-8
CN-30-8
37.30 1.469
REF
39.50 1.555
REF
FIG 1
MCPK-8-S SHOWN
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
MINI CIRC. CABLE KIT
BY:
MCPK-8-X
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
J. BORGELT
4/15/13
1
1
SHEET SCALE: 1:1
INSULATORS, CABLE NUT, C-RING: PPS
GASKET, O-RING: SILICONE
SPRING: STAINLESS STEEL
COUPLING RING, SPACER: PBT
CABLE CLAMP: POM
F:\DWG\MISC\MKTG\MCPK-8-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COMPONENTS TO BE PACKAGED PER PACKAGING STANDARDS CO-RF-WI-3001-M.
3. TORQUE SPECIFICATION FOR CN-30-8 (CABLE NUT): 0.5 Nm [4.4 IN-LBS]
4. CABLE DIAMETER RANGE SPECIFICATION: 6.20[.244] - 7.00[.276]
5. -T (TERMINAL): REFERENCE DCA-MCP-8 PRINT FOR TERMINAL DUSTCAP
-S (SOCKET): REFERENCE DCA-MCR-8 PRINT FOR SOCKET DUSTCAP
6. PLACE HDRL-07 (LABEL) ON BAG. LABEL TO HAVE THE FOLLOWING
PRINTED IN ARIAL FONT SIZE 9:
LINE 1 - "FOR ASSEMBLY INSTRUCTIONS SEE"
LINE 2 - "WWW.SAMTEC.COM/MCPKFTK"
LINE 3 - PART NUMBER "XXXXXX"
LINE 4 - SHOP ORDER NUMBER "XXXXXXX"
7. -T (TERMINAL): REFERENCE TC114-XXXX-X-X PRINT FOR TERMINALS.
-S (SOCKET): REFERENCE CC393-XXXX-X-X PRINT FOR CONTACTS.
REVISION A
